![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-30ccsqzbm/toughbook-cf-30ccsqzbm_reference-manual_4183330009.webp)
9
Standby and Hibernation Functions
At the beep
, immediately release the power switch. If you slide and hold the power switch for longer than 4 seconds,
the computer will forcibly shut down and unsaved data will be lost even if you have set [Shut down] in [When I press
the power button on my computer] (
“Setting Standby or Hibernation”).
In standby or hibernation
Do not attach or remove a multimedia pocket device (excluding a second battery pack) and peripheral device. Doing
so may cause malfunction.
Power is consumed in standby mode. Power consumption may increase when a PC Card is inserted. When power is
exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the standby function.
Do not turn on/off the wireless switch.
*2
If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not
sound.
To resume from standby or hibernation
1
Open the display, or slide the power switch (A).
When [Stand by] or [Hibernate] is selected as the setting for [When I close the
lid of my portable computer] (
), you can resume operation opening the
display.
CAUTION
Do not perform the following operations until resuming is complete. After the display has resumed, wait approximately
30 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), touch pad, touchscreen (only for model with touchscreen), or power
switch.
• Use an external mouse or other peripheral device.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
• Enter standby or hibernation.