background image

27

SD Memory Card

The SD Memory Card has a copyright protection function which is compatible with content on-demand services on the 
Internet, etc.
To format the SD Memory Card on this computer, do not use [Format] of Windows, but use the SD Memory Card format 
software.
You can download the software from the web site below.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
To use the SD Memory Card on other devices, format the card on those devices. For further information, refer to the 
instruction manual of the devices.
This computer supports SDHC Memory Cards (SD Memory Cards with a capacity of more than 2 GB).

Handling and storage cautions

Store the SD Memory Card in the case after removing it from the computer.
Do not:
• Disassemble or modify the card.
• Hit, bend, or drop the card.
• Touch the terminals with fingers or metal object.
• Remove the labels of the card / Attach other labels or stickers to the card.
Do not place the card in the following locations.
• In direct sunlight or in very hot location such as inside of a car.
• In very dusty or humid location.
• In location subject to corrosive gas, etc.

Data handling cautions

Set the write-protect switch (A) to the LOCK position. Unlock the switch when recording 
(checkout), saving, or editing data.
We recommend you to back up the important data to another storage medium.
When disposing the card, we recommend you to physically destroy the card (using a ham-
mer, etc.) to prevent personal or confidential data leakage.

SD Memory Card Information

Summary of Contents for Toughbook CF-30CCSQZBM









































































































Reviews: