Panasonic Toughbook CF-30CCSQZBM Page 63 Reference Manual Download

Page: 63 / 104

Wireless LAN

Double-click

on the notification area.

The [Intel® PROSet/Wireless] screen appears.

When

is displayed, skip step

When you double-clicked

in step

, slide the wireless switch to turn on.

Click [Profiles...] at the lower right corner of the window, and click [Add...].

Enter the profile name and wireless network name (SSID), and make other necessary
changes, then click [Next].

Make necessary settings and click [OK].

Select the profile you set and click [Connect].

Click [Close].

NOTE

You need to set the profile for each user.
The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
For further information of Intel

PROSet/Wireless Software, refer to [Help] in the menu bar.

Setting the Profiles

Summary of Contents for Toughbook CF-30CCSQZBM









































































































Search results

Summary of Contents for Toughbook CF-30CCSQZBM

Reviews:

Related manuals for Toughbook CF-30CCSQZBM

Brands by name

Popular brands

Panasonic Toughbook CF-30CCSQZBM, Reference Manual

Search results

Summary of Contents for Toughbook CF-30CCSQZBM

Reviews:

Related manuals for Toughbook CF-30CCSQZBM

Brands by name

Popular brands