background image

EN33

Engli

sh

Note

 

When 

 is pressed in steps 2 to 6, the previous screen is restored. 

After step 7, the previous screen will not be restored when the button is pressed.

 

Displays on the screens indicated will be in Chinese even if the English display mode is established.

Operation

LCD displays

Item checked

Optional accessory: Cartridge

Setting checks

1

Turn off  the faucet, 
and press 

 for 

1 second.

2

Press 

 , and select 

“ 

確認模式

 ”.

3

Press 

 .

4

Select the item using 

 .

 

Each time this button is 
pressed, the selection 
changes.

5

Press 

 .

Check the model 

number.

6

Select the item using 

 .

 

Each time this button is 
pressed, the selection 
changes.

Check the settings.

7

Press 

 .

8

Select the item using 

 .

 

Each time this button is pressed, 
the selection changes.

9

Press 

 .

e.g.)

(Go to step 7)

Select “ 

不是

 ” to 

set another item.
If “ 

不是

 ” was 

selected, go back 
to step 4.

 

How to set

(For details on the items which can be checked, see P. EN30.)

Remaining cartridge life display (standby status)

e.g.)

Mode selection

Setting mode

Check mode

Mode selection

Setting mode

Check mode

Check mode

Optional accessories

Setting checks
Exit

Check mode

Optional accessories

Setting checks
Exit

Check mode

Optional accessories

Setting checks

Exit

Setting checks

Continue mode: ON
Water outlet buzzer: OFF
Weak acidic buzzer: OFF

Exit the check mode?

Yes

No

Exit the check mode?

Yes

No

TK-AS66-ZEX̲En.indb   33

TK-AS66-ZEX̲En.indb   33

2017/01/30   15:04:22

2017/01/30   15:04:22

Summary of Contents for TK-AS66-ZEX





















































Reviews: