manualshive.com logo in svg

Panasonic TK-AS66-ZEX, Instruction Manual

The Panasonic TK-AS66-ZEX is a state-of-the-art water purifier, designed to provide clean, refreshing drinking water. For user convenience, an easy-to-understand Instruction Manual is available for free download from our website, ensuring proper usage and maintenance. Experience pure water at its finest with the Panasonic TK-AS66-ZEX.

Share
Download
background image

EN22

Operation (continued)

Using alkaline ion water, weak acidic water or purifi ed water 

(continued)

 

When the “Reduce fl ow” display appears 
(only while “Alkaline” or “Weak Acidic” is selected)

This message appears when too much water is 
fl owing (in this case, it may not be possible to 
achieve a high enough pH level).

Gradually reduce the fl ow from the faucet until 
the display is cleared*.
*:  For “Alkaline”: Flow of about 5.0 liters/minute 

For “Weak Acidic”:
Flow of about 3.2 liters/minute

Note

 

If the Alkaline Ionizer is used with the water 
quality/Application Pictogram displayed, the 
Flow will be indicated while the “Reduce fl ow” 
message is displayed. (This serves to provide a 
guideline for the fl ow adjustment.)

 

When “Alkaline 4 (Strongly Alkaline)” is 
selected, the “Reduce fl ow” message tends to 
appear more often. (In this case, it is cleared at 
a rate of about 2.2 liters/minutes.)

 

To fi nd out what the pH level is

Measure the pH level using the supplied pH test kit. (P. EN17)

Note

 

The remaining cartridge life is displayed when the fl ow drops (to less than 1.0 liter/min or so) 
because the fl ow at the faucet has been overly reduced or because of changes in the tap water 
pressure. (Electrolysis will be suspended if “Alkaline” or “Weak Acidic” is selected.) If one of the 
water quality selector buttons is pressed in this status, the water quality is displayed for about 4 
seconds, after which the “Flow reduced” and “Too much tightened at the faucet?” displays appear 
alternately. To use the Alkaline Ionizer again, open the faucet until the water quality display is 
restored.

To prevent the setting from returning to “Alkaline” after turning off  the faucet

Refer to “How to set” (P. EN32), and set “Alkaline priority” to “OFF”.

 

“Alkaline priority” will be set to “OFF” for purifi ed water only.

(“Alkaline” is restored after producing Alkaline 4 (Strongly Alkaline) or weak acidic and turning off  
the faucet.)

e.g.)  When “Alkaline” 

is selected

Displayed 
alternately

TK-AS66-ZEX̲En.indb   22

TK-AS66-ZEX̲En.indb   22

2017/01/30   15:04:17

2017/01/30   15:04:17

Summary of Contents for TK-AS66-ZEX





















































Reviews:

No comments

Related manuals for TK-AS66-ZEX

Brands by name

Popular brands

Load more brands