Off timer
90
1
2
3
4
P C
1 0 : 0 0
4:3
COMPONENT
NANODRIFT
17
Basic Controls
Remote Control Transmitter
Standby (ON / OFF) button
The Plasma Display must first be
plugged into the wall outlet and turned
on at the power switch (see page 13).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off
to Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 18)
POS. /SIZE button
(see page 22)
PICTURE button
(see page 24)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 23, 24, 25, 26)
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 15)
Digital Zoom
(see page 19)
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 22)
SET UP button
(see page 20)
SOUND button
(see page 26)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button
(see page 20)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Plasma Display can be preset to switch to
stand-by after a
fi
xed period. The setting changes
to 30 minutes, 60 minutes, 90 minutes and 0
minutes (off timer cancelled) each time the button
is pressed.
30
60
0
90
When three minutes remain, “Off timer 3” will
fl
ash.
The off timer is cancelled if a power interruption
occurs.
RECALL button
Press the “RECALL” button to display
the current system status.
1
Input label
2
Aspect mode (see page 18)
Audio input (see page 48)
NANODRIFT Saver operating
(see page 31)
3
Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4
Clock display (see page 45)
