Panasonic TH-42PH30U Operating Instructions Manual Download Page 45

Page: 45 / 51

When Image input and Audio input
differ from each other, the Audio
input is displayed as below.

Options Adjustment

Set up the sound when an image input is selected.

Image input

Audio input

[VIDEO]

VIDEO / COMPONENT / DVI / PC / NO AUDIO

[COMPONENT]*

VIDEO / COMPONENT / DVI / PC / NO AUDIO

[HDMI]

VIDEO / COMPONENT / HDMI / DVI / PC / NO AUDIO

[DVI]

VIDEO / COMPONENT / DVI / PC / NO AUDIO

[PC]

VIDEO / COMPONENT / DVI / PC / NO AUDIO

NO AUDIO: No audio input (Mute)

* “COMPONENT” may be displayed as “RGB” depending on the setting of

“COMPONENT/RGB-IN SELECT”.

(see page 37)

Note:

HDMI Audio is selectable only for HDMI Input.

Audio input select

Press to select image input.

Press to select audio input.

COMPONENT

FULL

Press ACTION ( ) button

VIDEO

Audio input select

COMPONENT
HDMI
DVI
PC

♪

VIDEO

♪

COMPONENT

♪

HDMI

♪

DVI

♪

Options

Audio input select

Touch Panel settings

1/3

Options

Audio input select

Touch Panel settings

1/3

Touch Panel mode
Calibration mode

Touch Panel settings

Touch Panel mode
Calibration mode

Touch Panel settings

The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds.

After 180 seconds or when you have the menu displayed with a remote control, Calibration

mode is cancelled.

Note:

For information on how to set up Calibration, please see Touch Panel instruction manual.

The mode to restrict NANODRIFT SAVER (see page 30) operation when using Touch Panel (available as an option) is

set up.

Set “Touch Panel mode” to “On”.

Select “Calibration mode” and then press

This setting is used in calibrating a touch panel.

You can con

gure the setting if “Touch Panel mode” is “On”.

Calibration mode

Touch Panel settings (Settings when using Touch Panel)

Calibration mode

select

adjust

select

set

NANODRIFT SAVER in Touch Panel mode: On

The value set for NANODRIFT turns into “ON” and displayed

in gray.

The moving distance of NANODRIFT is limited to 3 × 3 dots to

prevent pointer drift on a touch panel.

When the menu is not displayed
(normal screen)

Hold down

for over 3 seconds.

Summary of Contents for TH-42PH30U




















































Search results

Summary of Contents for TH-42PH30U

Reviews:

Related manuals for TH-42PH30U

Brands by name

Popular brands

Panasonic TH-42PH30U, Operating Instructions Manual

Search results

Summary of Contents for TH-42PH30U

Reviews:

Related manuals for TH-42PH30U

Brands by name

Popular brands