18
Basic Controls
Standby (ON / OFF) button
The Plasma Display must
fi
rst be plugged
into the wall outlet and turned on at the
power switch (see page 14).
Press this button to turn the Plasma
Display On, from Standby mode. Press
it again to turn the Plasma Display Off to
Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
POS./SIZE button
(see page 22)
PICTURE button
(see page 24)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 23, 24, 25, 26)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 16)
Digital Zoom
(see page 22)
Remote Control Transmitter
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 22)
SET UP button
(see page 21)
SOUND button
(see page 26)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button
(see page 21)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Plasma Display can be preset to switch to stand-
by after a
fi
xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30 MIN
60 MIN
0 MIN (Cancel)
90 MIN
When three minutes remain, “OFF TIMER 3 MIN”
will flash. The off timer is cancelled if a power
interruption occurs.
RECALL button
Press the “RECALL” button to display
the current system status.
1
Input label
2
Aspect mode (see page 19)
Audio input (see page 45)
NANODRIFT SAVER operating
(see page 30)
3
Off timer
The off timer indicator is displayed only
when the off timer has been set.
OFF TIMER 90MIN
1
2
3
PC
4:3
♪
COMPONENT
NANODRIFT
