60
Press ACTION ( ) button
Options
Audio input select
Touch Panel settings
1/3
Weekly Command Timer
Touch Panel mode
Calibration mode
Touch Panel settings
On
Touch Panel mode
Calibration mode
Touch Panel settings
On
The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds.
After 180 seconds or when you have the menu displayed with a remote control, Calibration
mode is cancelled.
Note:
For information on how to set up Calibration, please see Touch Panel instruction manual.
The mode to restrict NANODRIFT SAVER (see page 40) operation when using Touch Panel (available as an option) is
set up.
Set “Touch Panel mode” to “On”.
Select “Calibration mode” and then press
.
This setting is used in calibrating a touch panel.
You can con gure the setting if “Touch Panel mode” is “On”.
Calibration mode
Touch Panel settings (Settings when using Touch Panel)
ª
Calibration mode
1
select
2
adjust
1
select
2
set
NANODRIFT SAVER in Touch Panel mode: On
The value set for NANODRIFT turns into “ON” and displayed
in gray.
The moving distance of NANODRIFT is limited to 5 × 5 dots to
prevent pointer drift on a touch panel.
When the menu is not displayed
(normal screen)
Hold down
for over 3 seconds.
Options Adjustments
