Panasonic TH-42PF30U Operating Instructions Manual Download Page 48

Page: 48 / 72

SET UP for PORTRAIT

Press to select VIEWING AREA or LOCATION.

Press to select each function.

Notes:

• For HD signal videos, the “VIEWING AREA” is set at “16:9”,

and cannot be changed.

HD signal: 1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p

• 24sF, 750 (720) / 60p • 50p, 1250 (1080) / 50i

• When “VIEWING AREA”is “16:9”, the aspect mode is set to “FULL”.

Press to exit from adjust mode.

Press to select AI-SYNCHRONIZATION.

Press to select “OFF” , “ON”.

Adjust to equalize the brightness of the 3 displays when using PORTRAIT setting.

The brightness depends on

each display’s setting.

Equalize the brightness of

all the displays.

OFF

Notes:

• If you set AI-SYNCHRONIZATION to ON, the

following menus will be unavailable and these
settings will be xed to the initial values.
PICTURE menu: COLOR, TINT, INPUT

LEVEL (ADVANCED
SETTINGS)

• This function cannot be adjusted during

input from VIDEO terminal.

AI-SYNCHRONIZATION

OFF

PORTRAIT SETUP
SEAM HIDES VIDEO

OFF

AI-SYNCHRONIZATION

VIEWING AREA
LOCATION

16:9

PORTRAIT SETUP

OFF

PORTRAIT SETUP
SEAM HIDES VIDEO

OFF

AI-SYNCHRONIZATION

VIEWING AREA
LOCATION

16:9

PORTRAIT SETUP

VIEWING AREA:

Set a mode of image division for PORTRAIT function.

LOCATION:

Set a location of image to be displayed for PORTRAIT function.

VIEWING AREA / LOCATION

When PORTRAIT SETUP “ON”:

Display the image of the selected LOCATION.

When PORTRAIT SETUP is “OFF”:

Represent an area of the selected LOCATION at a normal
brightness and darken the rest of it.

LOCATION setting

VIEWING AREA and LOCATION

The mode of image division and the LOCATION by setting of VIEWING AREA is as follows.

LOCATION 1

LOCATION 2

LOCATION 3

LOCATION 1

LOCATION 2

LOCATION 3

VIEWING AREA: 4:3

Suitable to display FULL images. NORMAL
(4:3) images extend transversely.
Both right and left sides of the image are
cut by 48 dots.

VIEWING AREA: 16:9

4:3 images are displayed without changing
aspect ratio.
Although the images of each LOCATION
overlap, you can adjust POS./SIZE to display
the image normally. (see page 26)

Undisplayed area (48 dots)

Summary of Contents for TH-42PF30U









































































Search results

Summary of Contents for TH-42PF30U

Reviews:

Related manuals for TH-42PF30U

Brands by name

Popular brands

Panasonic TH-42PF30U, Operating Instructions Manual

Search results

Summary of Contents for TH-42PF30U

Reviews:

Related manuals for TH-42PF30U

Brands by name

Popular brands