19
Basic Controls
Remote Control Transmitter
Standby (ON / OFF) button
The Plasma Display must rst be
plugged into the wall outlet and turned
on at the power switch (see page 15).
Press this button to turn the Plasma
Display On, from Standby mode.
Press it again to turn the Plasma
Display Off to Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 20)
POS./SIZE button
(see page 25)
PICTURE button
(see page 28)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume
level is changed.
N button
(see page 27, 28, 29, 33)
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 17)
Digital Zoom
(see page 21)
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 25)
SET UP button
(see page 24)
SOUND button
(see page 33)
Volume Adjustment
Press the Volume Up “+” or Down “–”
button to increase or decrease the
sound volume level.
R button
(see page 24)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Plasma Display can be preset to switch to
stand-by after a xed period. The setting changes
to 30 minutes, 60 minutes, 90 minutes and 0
minutes (off timer cancelled) each time the button
is pressed.
30 min
60 min
0 min (Cancel)
90 min
When three minutes remain, “Off timer 3 min”
will ash.
The off timer is cancelled if a power interruption
occurs.
RECALL button
Press the “RECALL” button to display
the current system status.
1
Input label
2
Aspect mode (see page 20)
During 3D images (see page 35)
Audio input (see page 58)
Pro le name (see page 32)
NANODRIFT Saver operating
(see page 39)
3
Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4
Clock display (see page 55)
Off timer 90min
1
2
3
4
P C
1 0 : 0 0
4:3
3D
COMPONENT
Memory name: MEMORY2
NANODRIFT
