Panasonic TH-42PF30ER Operating Instructions Manual Download Page 47

Page: 47 / 71

Off

Portrait Setup
Seam hides video

Off

AI-synchronization

Viewing Area
Location

16 : 9

Portrait Setup

Off

Portrait Setup
Seam hides video

Off

AI-synchronization

Viewing Area
Location

16 : 9

Portrait Setup

Set up for Portrait

Press to exit from adjust mode.

Press to select AI-synchronization.

Press to select “Off” , “On”.

Adjust to equalize the brightness of the 3 displays when using Portrait setting.

The brightness depends

on each display’s setting.

Equalize the brightness

of all the displays.

Off

Notes:

• If you set AI-synchronization to On, the following menus will be unavailable and these settings will be xed to the initial

values.

Picture menu: Colour, Hue, Input level (Advanced settings)
• This function cannot be adjusted during input from VIDEO terminal.

Press to select Viewing Area or Location.

Press to select each functions.

Notes:

• For HD signal videos, the “Viewing Area” is set at “16:9”,

and cannot be changed.

HD signal: 1125(1080) / 60i • 50i • 60p • 50p • 24p • 25p

• 30p • 24sF, 750(720) / 60p • 50p, 1250(1080) / 50i

• When “Viewing Area” is “16:9”, the aspect mode is set to “16:9”.

Viewing Area:

Set a mode of image division for Portrait function.

Location:

Set a location of image to be displayed for Portrait function.

When Portrait Setup is “On”:

Display the image of the selected location.

When Portrait Setup is “Off”:

Represent an area of the selected Location at a normal
brightness and darken the rest of it.

Location setting

Viewing Area and Location

The mode of image division and the Location by setting of Viewing Area is as follows.

Location 1

Location 2

Location 3

Location 1

Location 2

Location 3

Viewing Area : 4:3

Suitable to display 16:9 images. 4:3 images
extend transversely.
Both right and left sides of the image are
cut by 48 dots.

Viewing Area : 16:9

4:3 images are displayed without changing
aspect ratio.
Although the images of each Location
overlap, you can adjust Pos./Size to display
the image normally. (see page 25)

Undisplayed area (48 dots)

Viewing Area / Location

AI-synchronization

Summary of Contents for TH-42PF30ER








































































Search results

Summary of Contents for TH-42PF30ER

Reviews:

Related manuals for TH-42PF30ER

Brands by name

Popular brands

Panasonic TH-42PF30ER, Operating Instructions Manual

Search results

Summary of Contents for TH-42PF30ER

Reviews:

Related manuals for TH-42PF30ER

Brands by name

Popular brands