52
Item
Adjustments
Clock Display
Off:
Not display the clock.
On:
Display the clock.
The clock is displayed at the lower left of the screen when
button is pressed.
1 0 : 0 0
Note:
When “PRESENT TIME Setup” is not set, the clock is not displayed even
if “Clock Display” is “On” (see page 32)
Power On Message
(No activity power
off)
Whether to show/hide No activity power off Precautions at the time of power ON is set.
On:
The warning precautions are shown at the time of power ON.
Off:
The warning precautions are not shown at the time of power ON.
Note:
This setting is enabled only if “No activity power off” is “Enable” (see page 36).
Function button assign 1
Function button assign 2
Set the functions that operates when
is pressed.
Signal:
The “Signal” menu is displayed.
Screensaver:
The “Screensaver” menu is displayed.
ECO menu:
The “ECO Mode settings” menu is displayed.
Set up TIMER:
The “Set up TIMER” menu is displayed.
@J@:==@$
$& K>=|\]]: &
the YFB100 side is displayed.
Note:
Factory settings are as follows.
["\
FUNCTION2 button: Signal
Use the FUNCTION button
ZK%$ *
3D Y/C Filter
Colour system
Signal
On
Auto
Cinema reality
Off
[ AV ]
Noise reduction
Off
{[" > K
Normalisation
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the
-
/
button on main unit together with
button on the remote control and hold for more than 5 seconds.
The “Shipping” menu is displayed and the lock is released when it disappears.
Input Search
When a signal is not detected, another input with a signal is automatically selected.
Input Search
Primary Input
Off
Secondary Input
Input Search
Press ACTION ( ) button
Options
1/3
On screen display
Input Search
On
Initial input
Off
1
select
2
adjust
Input Search
Off:
When there is no signal, the input is not switched automatically.
All Inputs:
Searches all inputs and switches to an input with a signal.
Priority:
Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.
Options Adjustments