51
Item
Adjustments
Input lock
Locks the input switch operation.
Off
VIDEO
Component/RGB
PC
DVI
@J@:==@$
HDMI1
HDMI2
Off
Notes:
+" Z` Z%?\*K
+ & & ">>K
Button lock
Off
On
MENU&ENTER
Off:
All the buttons on main unit can be used.
MENU&ENTER:
Locks
MENU
and
buttons on main unit.
On:
' {&&K
Sets Button lock with the unit buttons in the following procedure.
Off:
Press
+
/
>¡{
INPUT
>¡{
-
/
>¡{
MENU&ENTER:
Press
>¡{
+
/
>¡{
INPUT
>¡{
On:
Press
-
/
>¡{
>¡{
+
/
>¡{
Remocon User level
Off
User1
User2
User3
Off:
You can use all of the buttons on the remote control.
User1:
You can only use
,
,
,
,
buttons on the remote control.
User2:
You can only use
button on the remote control.
User3:
Locks all the buttons on remote control.
Local Dimming
(for 42 and 47 inch
models only)
Improve the contrast by controlling the amount of LED backlight.
The contrast ratio of different area in a same picture can be dramatically improved.
Off:
Disables Local Dimming function.
On:
Enables Local Dimming function.
Off-timer function
Enable:
Enables the “Off-timer function”.
Disable:
Disables the “Off-timer function”.
Note:
When “Disable” is set, the Off-timer is cancelled.
Initial Power Mode
Normal
On
Standby
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.
Normal:
Power returns in as the same state as before the power interruption.
Standby:
Power returns in standby mode. (Power Indicator : red/orange)
On:
Power returns in power On. (Power Indicator : green)
Note:
When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.
ID select
Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
Remote ID
The setting of this menu is valid only when using ID remote control.
Off:
Disables ID remote control functions. You can use normal remote control operations.
On:
Enable ID remote control functions.
Note:
To use the ID remote control function, it is necessary to set each ID number of remote control and
display unit. About the setting method, please refer to “ID Remote Control Function” (see page 41)
and “ID select” (above-mentioned).
Serial ID
Sets the panel ID Control.
Off:
ZK
On:
ZK
Serial Daisy Chain
Sets the top and end of a daisy chain when the SERIAL terminal of Display is daisy chained.
---:
When the Display is under SERIAL control on a standalone basis, or if not at the top or end of daisy
chain.
Top:
To connect to the top of daisy chain.
End:
To connect to the end of daisy chain.
Studio W/B
Off:
Nullify all the settings adjusted.
On:
Sets the colour temperature for TV studio.
Note:
Valid only when the “Warm” is set as “White balance” in Picture menu.
LAN Control
Protocol
Select the LAN control protocol.
Protocol 1:
Control with the Panasonic Display sequence.
Protocol 2:
Control with the sequence that compatible with Panasonic Projector.
RS-232C/LAN
Information Timing
Set up the informing manner if error warning occured. (see page 53)
Power ON Screen
Delay
Off
1
2
3....
30
You can set the power-on delay time of the displays to reduce the power load, when you press
to turn
Z:>: <[${ZK
Set each display’s setting individually.
Off:
The display will be turned on at the same time as
is pressed.
1 to 30 (sec.):
Set the power-on delay time (second).
After pressing
, the display will be powered on with time delay depending on this setting.
Notes:
+ > &' :& ' K
+This function also works when the power recovers from failure or after plugging off and in again the power cord.
Options Adjustments