45
Setup for Input Signals
Noise reduction
(
)
Noise reduction
Off
Press to select “Noise reduction”.
{">>::< :<:<K
Auto:
Noise reduction will be automatically selected from “Min”,
<<K
Note:
+ Noise reduction can be adjusted while a Video or Component signal is being applied.
Sync
This function operates only during input from PC IN terminal.
Sync
Signal
[ RGB ]
Cinema reality
XGA Mode
Auto
Off
1024
×
768
Press to select the “Sync”.
Press to adjust.
#| % @ Z>#| *K
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
;&@:Z ^ K
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
+ Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”.
HDMI Range
Switches the dynamic range according to the input signal from HDMI terminal.
Cinema reality
Signal
Off
HDMI Range
Noise reduction
Auto
Off
[ Digital ]
Press to select “HDMI Range”.
Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.
Video(16-235):
> @ :;< >Z
Full(0-255):
> > :;< >
Auto:
Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.
Note:
+ > ;< K