Panasonic TH-103PF10EK, Service Manual

Page: 66 / 131

8.2.3. Power control adjustment
TH-103PF10UK/EK
Instrum ent Name Connection Rem arks
PC (RGB) signal generator
(Leader: VG A / No.9 signal)
W attm eter
PC input
Connect the AC power o f the adjust­
m ent set to the w attm eter.
Set “ RGB” at ‘C O M PO N EN T / RGB-IN
SELEC T’ in Setup Menu.
Procedure Remarks
[condition]
• Make sure the set is aged for 30 m inutes or more before adjustment.
• Voltage 240V 50 / 60Hz (variation within 1%)
• Volume at m inimum and screen size at full
• PC input and picture menu at norm alized Dynamic
1. Connect the set’s AC power to the wattmeter.
2. Receive the VG A No.9 signal from Leader.
3. Select the PW RCTL item in Panel APL / ABL in the IIC mode.
4. Adjust PW RCTL so the set's power consum ption is description below.
Adjust to shift large to small for DAC.
Factory adjustm ent with OSD
1350+10W / -30W
BUSCON without OSD
1350+10W / -30W
No.9 Signal
Top half: F ull color bar
Bottom half: H orizontal 16 steps bar
Notes:
1. W hen passing through factory
adjustm ent mode, the power few
w atts which goes down is the consid­
eration being completed.
2. A djust the large num ber for DAC
when they have 2 adjustm ent points.
66