Panasonic TH-103PF10EK, Service Manual

Page: 17 / 131

TH-103PF10UK/EK
Option Menu for G PF10D series
GPH10D chassis series have special function and operation setting facility called Option Menu. This Option Menu is use­
ful for special function required customers. This should be set at the installation stage.
Option menus default setting Contents
W eekly Com m and Timer
---
O ff-tim er Sets W eekly Com mand Timer. Enable/Disable.
O nscreen display On Enable/Disable to display input mode indication after power on and no signal
indication.
Initial INPUT O ff Sets the initial input mode when the pow er is turned on. Allow input mode selec­
tion while pow er is on.
Initial VOL level O ff Sets the initial volum e level when the power is turned on. Allow Volume control
while power is on.
M aximum VOL Level O ff Sets the m aximum volum e to desired level. Volume cannot exceed this level.
INPUT lock O ff Fixes the input mode to AV, Com ponent/RG B or PC. Can not change input
mode by input selection key
Button lock O ff Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volum e up/
down)
Rem ocon User Level O ff Remote key invalidation.
Off: Valid key is all key o f remote.
User1: Valid key are only Stand-by (ON/OFF), Input, Direct input, Status, Sur­
round, Sound mute On/Off, and volum e adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Advanced PIP O ff Off: Sets normal two screen display mode.
On: Sets Advanced PIP mode.
Off-tim er function Enable O ff-tim er operation Enable/Disable.
Initial Power Mode Normal Sets the power mode o f the unit for when the power recovers from failure or
after plugging o ff and in again.
ID select 0 Set ID num ber from 0 to 100.
Remote ID O ff Remote ID function On/Off.
(While the Remote ID on, standard remote function can not control the unit.)
Serial ID O ff Serial ID function O n/O ff
Display size O ff Adjusts the im age display size on screen.
On: Sets the image display size approxim ately 95% o f the norm al im age dis­
play.
Studio W/B O ff Set warm mode color tem perature to 3,200 Kelvin.
Studio Gain O ff Sharpens the contrast for a better view when a part o f the image is too light to
see
Slot power O ff Sets the slot power mode while the power is turned on.
Allow O ptional Terminal Board insert Slots while power is on.
Power On Screen Delay O ff You can set the power-on delay time o f the displays to reduce the power load,
when you press ( [ ) / | to turn on the m ultiple displays that are set together, for
example, on MULTI DISPLAY system.
Set each display'fs setting individually.
V. Installation O ff V. Installation function O n/O ff (Not used)
Rotate O ff The image rotates 180 degrees (up-down)
Serial Slot Select Slot1 Selects the slot which com m unicates serial.
Note:
The setting o f an external com m and can be set only from the fixed serial
term inal.
Note:
W hen both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Rem ote ID"
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the "Volume down" button on main unit together with "R" button on the remote control and hold for more than 5 seconds.
The "SHIPPING" menu is displayed and the lock is released when it disappears.
17