Panasonic TH-103PF10EK, Service Manual

Page: 67 / 131

9 Block Diagram
9.1. DiagramNote
------------------------ Important Safety Notice ------------------------
Components identified by A mark have special characteristics important for safety.
When replacing any of these components, use only manufacture's specified parts.
Notes:
1. Resistor
Unit of resistance is OHM [Q] (K=1,000, M =1,000,000).
2. Capacitor
Unit of capacitance is (xF, unless otherwise noted.
3. Coil
Unit of inductance is H, unless otherwise noted.
4. Test Point
9 : Test Point position
5. Earth Symbol
^ : Chassis Earth (Cold) ^ : Line Earth (Hot)
6. Voltage Measurement
Voltage is measured by a DC voltmeter.
Conditions of the measurement are the following:
Power S o u rc e ........................................................AC240V, 50/60Hz (UK)
AC220-240V, 50/60Hz (EK)
Receiving S ig n a l................................................... Colour Bar signal (RF)
All customer's c o n tro ls ......................................... Maximum positions
7. When arrow mark ( is found, connection is easily found from the direction of arrow.
8. Indicates the major signal flow. : Video ^ Audio i=>
9. This schematic diagram is the latest at the time of printing and subject to change without
notice.
TH-103PF10UK/EK
Diagram Notes