Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download Page 81

Page: 81 / 332

Default Value

Not stored.

Configuration File Reference

STATIC_GATEWAY_IPV6 (Page 183)

Auto DNS via DHCP

Description

Selects whether to enable or disable the DNS server obtained by
DHCPv6.

Note

•

This setting is available only when

[Connection Mode]

is set

[DHCP]

Value Range

•

Yes: Use DNS obtained by DHCPv6

•

No: Not use (use static DNS)

Default Value

Yes

Configuration File Reference

DHCP_DNS_ENABLE_IPV6 (Page 184)

DNS1

Description

Specifies the IP address of primary DNS server for IPv6.

Value Range

Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]

Default Value

Not stored.

Configuration File Reference

USER_DNS1_ADDR_IPV6 (Page 184)

DNS2

Description

Specifies the IP address of secondary DNS server for IPv6.

Value Range

Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]

Default Value

Not stored.

Configuration File Reference

USER_DNS2_ADDR_IPV6 (Page 184)

4.3.2 Ethernet Port Settings

This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.

Document Version 2015-12

Administrator Guide

4.3.2 Ethernet Port Settings

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands