Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download Page 195

Page: 195 / 332

Default Value

Web User Interface Reference

HTTP Version (Page 85)

HTTP_USER_AGENT

Value Format

STRING

Description

Specifies the text string to send as the user agent in the header of HTTP
requests.

Value Range

Max. 64 characters

Note

•

If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.

•

If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.

•

If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.

•

If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.

Default Value

Panasonic {MODEL} hw01.00 fw{fwver} {mac}

Web User Interface Reference

HTTP User Agent (Page 86)

HTTP_AUTH_ID

Value Format

STRING

Description

Specifies the authentication ID required to access the HTTP server.

Value Range

Max. 128 characters

Default Value

Empty string

Web User Interface Reference

Authentication ID (Page 86)

HTTP_AUTH_PASS

Value Format

STRING

Description

Specifies the authentication password required to access the HTTP
server.

Value Range

Max. 128 characters

Default Value

Empty string

Web User Interface Reference

Authentication Password (Page 86)

Document Version 2015-12

Administrator Guide

195

5.3.7 HTTP Settings

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands