Panasonic SV-AP10B, Operating Instructions Manual

Page: 4 / 56

4444
Important Information
The Preheat function works so that high picture quality is
keeped when the surrounding temperature is low.
Therefore, even if pressing [PRINT] button, the operation
may stop for a while. (Printing starts within about 1 minute
automatically.)
If the temperature of the main unit become higher when
performing multiple copy, printing pauses automatically to
lower the temperature and the printing time becomes
longer. However, this is not a malfunction.
≥
In the case of printing with using a personal computer,
the message of [Please wait until the temperature of
printer decreases.] is displayed on the monitor of a
personal computer.
≥
In the case of printing with using a memory card, the
message of [Please wait until the temperature
decreases.] is displayed on the monitor of a TV.
When using the Photo Printer with PC Card (Especially,
Hard Disk Type Card), be careful because the
temperature of the surface on the Card may rise.
Before opening the CD-ROM package, please read the
following.
End User License Agreement
You (“Licensee”) are granted a license for the Software
defined in this End User Soft Agreement (“Agreement”) on
condition that you agree to the terms and conditions of
this Agreement. If Licensee does not agree to the terms
and conditions of this Agreement, promptly return the
Software to Matsushita Electric Industrial Co., Ltd.
(“Matsushita”), its distributors or dealers from which you
made the purchase.
Article 1 License
Licensee is granted the right to use the software,
including the information recorded or described on the
CD-ROM, instruction manuals, and any other media
provided to Licensee (collectively “Software”), but all
applicable rights to patents, copyrights, trademarks and
trade secrets in the Software are not transferred to
Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer or allow any
third party, whether free of charge or not, to use, copy or
modify the Software, except as expressly provided for in
this Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the Software in
whole or a part solely for back-up purpose.
Article 4 Computer
Licensee may use the Software only on one computer,
and may not use it on more than one computer.
Article 5 Reverse Engineering, Decompiling or
Disassembly
Licensee may not reverse engineer, decompile, or
disassemble the Software, except to the extent either of
them is permitted under law or regulation of the country
where Licensee resides. Matsushita, or its distributors will
not be responsible for any defects in the Software or
damage to Licensee caused by Licensee’s reverse
engineering, decompiling, or disassembly of the Software.
Article 6 Indemnification
The Software is provided “AS-IS” without warranty of any
kind, either expressed or implied, including, but not limited
to, warranties of non-infringement, merchantability and/or
fitness for a particular purpose. Further, Matsushita does
not warrant that the operation of the Software will be
uninterrupted or error free. Matsushita or any of its
distributors will not be liable for any damage suffered by
Licensee arising from or in connection with Licensee’s
use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to any country
the Software in any form without the appropriate export
licenses under regulations of the country where Licensee
resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be
automatically terminated if Licensee contravenes of any
of the terms and conditions of this Agreement. In the
event, Licensee must destroy the Software and related
documentation together with all the copies thereof at
Licensee’s own expense.
SV‑AP10B.book 4 ページ ２００２年９月１８日 水曜日 午前８時５５分