32
For assistance, please call : 1-800-272-7033.
POWER Switch
Playing Back Captured Images
1
Press MENU to display PLAY MENU
and press to set DISPLAY MODE to
NORMAL.
• Press MENU to exit.
2
Press (+) or (-) repeatedly,
[ (+) for ascending order, and (-) for
descending order] to change the
displayed image on the LCD
Viewfinder.
• The image page number and
recording mode are displayed at the
bottom of the screen.
• If there are no images in memory,
a blue back screen will be displayed.
• The image with audio is played back
when SHTR is pressed.
3
Hold down (+) or (-), [ (+) for
ascending order, and (-) for
descending order] to quickly advance
the images on the LCD Viewfinder.
• Page number is changed
continuously while (+) or (-) is
held down.
• Selected page is displayed when
button is released.
Playing Back Captured Images
You can playback recorded images on the
LCD Viewfinder.
• For images recorded with audio, a
mark is displayed on the screen and
audio is played back when SHTR is
pressed.
[ With AUDIO ]
[ Without AUDIO ]
Set the POWER Switch to PLAY.
(See page 19.)
Before you begin
1
MENU Button
1, 2, 3
Select Button /
• A still image with audio will be played. The
audio volume can be adjusted by
pressing VOL
(+) /
(-).
• Do not subject unit to a strong impact
during record or playback. Unit may not
function normally.
• Do not use in extreme heat (104° F and
above). This may damage the disk. Also,
in extremely hot places (104° F and
above), remove the disk from the camera
and store to avoid damaging disk.
• Power shuts off if there is no activity over
2 minutes with Battery as a power source
to conserve power. Press SHTR to turn
POWER back.
Manual Playback
Note
LCD
Viewfinder
VOL Button
(+) /
(-)
SD5000. p29-32.p65
80/01/04, 11:39
32
