23
22
When using for the first time & on every use
<Do not use any of the following>
Metal scourers, nylon
scourers etc.
O
Excluding sensors
Benzine, thinner,
polish, bleach,
antibacterial alcohol
etc.
Dishwasher/dryer
or dish dryer
O
After removing, wash with a soft sponge.
*When using a washing-up liquid, check the precautions of it.
Steam
Cap
Inner Lid Inner Pan Rice Scoop Ladle Steaming
Plate
Rice Scoop
Holder
* Remove in the order of
①
to
③
, and after cleaning, attach in the reverse
order.
*When using for the first time, please also wash the Measuring Cup.
O
After using seasoning, such as casserole rice, wash promptly.
(Since these can cause odour, rot, or rust.)
Do not wash using
the scouring pad.
①
②
③
Cleaning
O
For cleaning, remove the Power Plug and ensure that the main body has cooled down.
O
The Packing attached to both the main body and the Inner Lid cannot be removed.
Do not pull by using excessive force or puncture with sharp-pointed objects.
(This may cause defects, delamination and damage.)
O
After washing, wipe with a dry cloth.
Lid Sensor / Pan Sensor
Wipe with a well-wrung cloth.
O
If the dirt is hard to remove, dab a mild washing-up
liquid on a nylon scourer and wipe gently.
Note
O
Using the Lid Sensor or Pan
Sensor while they are dirty may
result in an error message being
displayed, and the rice being
burnt or otherwise cooked in an
unsatisfactory way.
Dirt on Pan Sensor
Inner Lid
Inner Pan
Stoppers / Inner Surface of Outer Lid /
Packing / Clear Frame / Hooks
Wipe with a well-wrung cloth.
[Stoppers / Hooks]
O
If they are blocked with objects such as grains of rice,
remove them with bamboo skewers or similar utensils.
(
Failure to do so may cause steam to jet out,
ingredients to eject out, or prevent the Outer Lid
from
opening
properly.
)
[Inner Surface of Outer Lid / Packing]
O
After removing the Inner Lid, carefully wipe the
depressions and Packing of the Outer Lid.
(It may cause a smell of rice or rotting.)
[Clear Frame]
O
If seasoning, etc. adheres to the Clear Frame, wipe
it off without delay. (It may cause rust.)
Inner Lid
Remove and wash with a mild washing-up liquid.
O
Remove and wash both sides of the Inner Lid.
Packing
Safety Valve
Pressure
Control
Valve
(Front)
(Back)
Pressure
Reducing
Valve Filter
Pressure
Reducing
Valve
[Packing]
O
In particular, wash the inside of the packing
carefully, as dirt can collect easily there.
(
It may cause a smell of rice, rotting, steam to
)
leak, or cooking contents to jet out.
[Pressure Control Valve / Safety Valve]
O
Quickly push the Valves 2 to 3 times with your
finger and wash with running water.
O
If the area around the Valves is blocked with
objects such as grains of rice or dirt, remove them
with bamboo skewers, toothpicks or similar
utensils.
(
It may cause steam to leak, or cooking contents
)
to jet out.
[Pressure Reducing Valve Filter / Pressure
Reducing Valve]
O
Wash with running water while
pressing the Pressure
Reducing Valve.
O
If the Filter is blocked with objects such as grains
of rice or dirt, remove them with bamboo skewers,
toothpicks or similar utensils.
(
It may cause steam to leak, or cooking contents
)
to jet out.
Q
Removing
①
Press the Inner Lid
Release Button.
(The Inner Lid tilts forward.)
②
Pull out.
Q
Attaching
①
Insert the Inner Lid into
the grooves.
②
Press into the Outer Lid
until you hear a “click”.
Press the
Pressure
Reducing Valve.
(Back)
②
①
②
Grooves
Steam Cap
Remove and rinse with water.
Precautions
O
Do not remove the Packing.
(It may cause steam to leak, or cooking contents to jet out.)
O
If the Packing came off, please reattach.
Fit into the groove.
Press into the hole.
Packing
Q
Removing
①
Pull up to remove.
O
After use, water
droplets may fall from
the Steam Cap.
Attaching portion of
the Steam Cap
O
Wipe the attaching
portion.
②
Open while pressing
the button.
Shaft
Button
Shaking makes a
noise because of
the ball inside.
Q
Attaching
(In the reverse order to removing.)
①
Insert the shafts and close firmly until it clicks.
②
Attach on the Outer Lid.
(Ensure that it has been attached firmly.)
Steam Cap
Hook Button
O
If the Hook Button becomes
dirty or gets stuck, wipe off
the dirt, etc. with a cotton
swab dampened with
lukewarm water while
pressing the Hook Button.
Stoppers
Packing
Lid Sensor
Clear Frame
Pan Sensor
Hooks
Inner Pan
(P.8)
/ Rice Scoop / Ladle / Steaming Plate
/ Rice Scoop Holder
Wash with a mild washing-up liquid.
Precaution
O
Do not use the Inner Pan as a washing-up bowl.
( Since this may result in peeling of the inner coating.)
Outer Lid
Cleaning
