Panasonic SF4D Series Instruction Manual Download

Page: 3 / 176

Thank you very much for purchasing Panasonic Industrial Devices SUNX's Safety Light Curtain,

SF4D

series.

Please read this Instruction Manual carefully and thoroughly for the correct and optimum use of

this product.

Kindly keep this manual in a convenient place for quick reference.

This device is an optoelectronic safety sensor that protects persons from injury or accident

which can be caused by dangerous parts of a machine.

This manual is for the following persons who have received appropriate training and have

knowledge of optoelectronic safety sensor and safety.

●

Those who are in charge of installation of this device.

●

Those who incorporate this device into systems or design them.

●

Those who install and/or connect this device

●

Those who manage or perform operations at sites where this device is used.

Notes

1) No part of this description should be copied or reprinted in any form or by any means without

prior permission in writing from the publisher.

2) The contents of this description are subject to change without notice for future improvement.

3) Every effort is made to produce this description. If you find any question, error, incorrect col

lating and/or missing page, please do not hesitate to contact our nearest local office to you:

Panasonic Industrial Devices SUNX.

4) The original version of this description is written in Japanese and English.

Summary of Contents for SF4D Series

















































































































































































Search results

Summary of Contents for SF4D Series

Reviews:

Related manuals for SF4D Series

Brands by name

Popular brands

Panasonic SF4D Series, Instruction Manual

Search results

Summary of Contents for SF4D Series

Reviews:

Related manuals for SF4D Series

Brands by name

Popular brands