© Panasonic Industrial Devices SUNX Co., Ltd. 2016
99
Select Control
■ Two-hand control
Used to configure Two-hand control devices of ISO 13851 (JIS B9712).
■ Select input
When output, state is switched between the two input blocks.
Three input blocks are connected to control blocks, and one of them is specified to be “key se
-
lector”.
If input block 2 and input block 4 are set as inputs to be selected and input block 3 is set and
connected to the key selector input, input block 2 is selected when IN5 is OFF and IN6 is ON
and input block 4 is selected when IN5 is ON and IN6 is OFF.
<Reference>
For the connectable input blocks, and combinations of them with control blocks, refer to “
”.