16
#95#25&!k@@'
10
130
67.3
35
4
54.1
40
6.5
80
(99)
25
34.1
13
31.1
11
23
18 18.4
38.4
46
#>` <^
Emitter side
connector
Receiver
side
connector
17
#5/5)2/2)9.)q#5?
The model listed under “
13
SPECIFICATIONS
” comes
with CE Marking.
18
9.)q#5?6.)./#252252)9#/^
Itemized Essentials of EC Declaration of Conformity
9!+z5@k
? < % ^0:
9!+z.""k
2431-1, Ushiyama-cho, Kasugai, Aichi 486-0901, Japan
)!z5@k
Panasonic Marketing Europe GmbH Panasonic Testing Center
)!z.""k
Winsbergring 15, 22525 Hamburg,Germany
"k
Exclusive Control Unit for Light Curtain
9"$5@k
SF-C10
Series
/"5@k
Panasonic
.$!+!$k
- RXXYZ[RZ"07 %
- RXX[Z\X]Z"0"70 %
- RXXYZ_`Z"0:} %
/""!*k
- "^Y\[_Y*\RXX[
- "^<!\>][_*\RXX]
- "^`X\]\__
- "^``X\\RXXRRXX
- "^Y\XXX*Y*RRXX`
/H\@!!k
0 #+}?% #
Ridlerstrasse 65 80339 München Germany
14
/)26:22/#5?
Symptoms
Cause
Remedy
“ ” lights up on the
digital indicator (red)
Setting date of the
product error
$Check the noise state.
$If the error is not cleared, con-
“ ” blinks on the
digital indicator (red)
Emergency stop in-
put error
$Wire the emergency stop input
/ output wire correctly.
“ ” blinks on the
digital indicator (red)
The total number of
sensors / total num-
ber of beam chan-
nels error
$Check the total number of sen-
sors / total number of beam
channels.
“ ” blinks on the
digital indicator (red)
Reset input error
$Wire the reset input / output
wire correctly.
“ ” blinks on the
digital indicator (red)
Safety output error
(Safety output circuit error)
$Wire the safety output wire cor-
rectly.
“ ” blinks on the
digital indicator (red)
PNP / NPN setting
error
$Change the setting after turning
the power OFF.
“ ” blinks on the
digital indicator (red)
Input voltage monitor
error
$Check the supply voltage and
the voltage capacity.
“ ” blinks on the
digital indicator (red)
Safety output error
(Safety output short-circuited)
$Wire the safety output wire cor-
rectly.
“ ” lights up on the
digital indicator (red)
Light curtain commu-
nication error
$Check if the light curtain is con-
nected correctly.
$Check the operation of the con-
nected light curtain.
“ ” blinks on the
digital indicator (red)
Safety output circuit
error
$Check the noise state.
“ ” blinks on the
digital indicator (red)
Effect by noise, pow-
er, etc. or internal
circuit failure
$Check the noise state.
“ ” blinks on the
digital indicator (red)
Internal error of the
product
$Check the noise state.
$Check the wiring, supply volt-
age and voltage capacity.
$If the product does not work
The test input indica-
tor (yellow) lights up
The product is in test
state.
$Wire the test input wire correctly.
Only the power in-
dicator (green) and
the auxiliary output
1, 2 and 3 indicators
(orange) light up.
All of the safety
outputs 1, 2 and 3
are OFF.
T h e p r o d u c t i s i n
e m e r g e n c y s t o p
state.
$Wire the emergency stop input
/ output terminal between S11
and S12, and S21 and S22 cor-
rectly.
$Check if the emergency stop
switch has been “pressed.”
The interlock indica-
tor (yellow) lights up
R e s e t c a n n o t b e
canceled.
$Wire the reset input / output
wire correctly.
$Change the relay having ap-
propriate response time.
$Replace the relay.
15
MAINTENANCE
Be sure to do maintenance before use and 6 month periodic main-
tenance. Refer included instruction manual of light curtain for the
inspection items.
In case replacing this device to new this device, be sure special
technician to exchange it. And do daily maintenance and periodic
maintenance.
