73
VQT3J03
≥
If there is not much remaining capacity in the SD card, a confirmation message asking to copy after
deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
1
Change the mode to
, and
switch play mode selection to
[SD CARD]/[PICTURE] or
[Built-inMemory]/[PICTURE]
(
l
65)
Change the mode to
, and
switch play mode selection to
[SD CARD]/[PICTURE] or
[HDD]/[PICTURE] (
l
65)
≥
Use a sufficiently charged battery or the
AC adaptor.
2
Select the menu. (
l
23)
≥
Select
to copy information from
the built-in memory to the SD card, or
select
to copy information from
the SD card to the built-in memory, then
press the centre of the joystick to confirm.
≥
Select
to copy information from
the HDD to the SD card, or select
to copy information from the SD
card to the HDD, then press the centre of
the joystick to confirm.
3
Follow the screen display, use
the joystick to select the
desired item then press the
centre of the joystick.
≥
(When [SELECT SCENES] is selected)
Press the centre of the joystick to select
the scene, after which
will be
displayed. Press the centre of the joystick
again to deselect.
≥
(When [SELECT DATE] is selected)
Press the centre of the joystick to select
the date, which will be outlined in red.
Press the centre of the joystick again to
deselect.
≥
Up to 99 still pictures or 99 dates can be
set in succession.
≥
If 2 or more SD cards are necessary to
copy, change the card following the
instructions on the screen.
4
Press the MENU button after
the copying complete message
appears.
≥
The thumbnail view of the copy
destination is indicated.
When you stop copying halfway
Press the MENU button while copying
≥
When the disc playback is selected while
a DVD burner (optional) is connected,
menus are not displayed.
≥
Depending on the following conditions, the
time it takes for copying may be longer.
j
The number of recorded scenes is
large.
j
The temperature of the unit is high.
≥
If some still pictures have already been
recorded to the copy destination, then the
same date may be assigned or images
may not display by date when the list by
date is selected.
≥
It may not be possible to copy some still
pictures recorded on other devices.
≥
Protection and DPOF settings will be
cleared on the copied still pictures when
copying still pictures with protection and
DPOF settings.
≥
The order in which the still pictures were
copied cannot be changed.
Copying
[COPY]
SDR-T76
SDR-H101
SDR-T76
SDR-H101
If you will delete the still pictures after
copying is complete, be sure to play
back the still pictures to check that
they have been copied to correctly
before deleting.
SDRH101&T76&S71GC-VQT3J03_mst.book 73 ページ ２０１０年１１月２２日 月曜日 午後４時４９分
