36
VQT3J03
This unit will resume recording pause mode
about 0.8 seconds after the LCD monitor is
reopened.
¬
Change the mode to
.
1
Select the menu. (
l
23)
2
Close the LCD monitor while
the mode is set to
.
The status indicator
A
flashes green and the
unit goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit
is put into recording pause.
≥
When in quick start standby mode
about 70% of the power used in
recording pause mode is being
consumed, so the recording time will
be reduced.
≥
Quick start standby mode is cancelled if
j
about 5 minutes elapsed
j
mode is set to
≥
It may take some time for automatic white
balance to adjust.
≥
In the quick start mode, the zoom
magnification becomes 1
k
.
≥
If [ECONOMY] (
l
25) is set to
[5 MINUTES] and the unit automatically
goes into quick start standby mode, close
the LCD monitor and then open it again.
≥
Turn the unit off using the power button.
Quick start
[SETUP]
#
[QUICK START]
#
[ON]
SDRH101&T76&S71GC-VQT3J03_mst.book 36 ページ ２０１０年１１月２２日 月曜日 午後４時４９分
