Panasonic SDR SW20 - Camcorder - 680 KP Page 92 Operating Instructions Manual Download

Page: 92 / 116

VQT1M21

Problem

What to check

The sound of the
motor is being
recorded.

●

This is an operating sound of the unit; there is

nothing wrong with the unit.

●

If there is a drop of water near the microphone, the

operating sounds of the unit are amplified. Wipe
away a drop of water with a dry cloth.

●

Underwater, operating sounds of the unit and

particularly motor sounds are amplified.

Speaker volume is
low.

If there is water on the speaker, the volume may
diminish. Wipe away any water with a dry cloth.

Images do not
appear on TV or
appear stretched
in the vertical
direction.

●

Does the input mode on the TV match the connected

terminals?
Set input to the connected terminals as explained in
the TV’s operating instructions.

●

Set [TV ASPECT] to match the connected TV. (P.60)

Data cannot be
deleted.

●

Is the scene locked?

Unlock the scene. (P.58)

●

Scenes whose thumbnails have a

cannot be

deleted. If the data is unnecessary, format the SD
card. (P.58) Formatting deletes all data on the SD
card.

●

Is the SD card write-protected? (P.21)

Images on the SD
card do not look
normal.

The scene may be damaged. Scenes can be
damaged by static electricity and electromagnetic
waves. Save important data on a computer, etc.

The SD card cannot
be used even after
formatting with this
unit.

This unit or the SD card may be broken. Consult the
dealer from which you purchased the unit. For SD
cards applicable with this unit (P.20)

The unit does not
recognize the SD
card when inserted.

Was the SD card formatted on the computer?
Format SD cards with the unit.
Formatting deletes all data on the SD card. Data
cannot be restored afterwards. (P.58)

Others

Troubleshooting

(cont.)

Summary of Contents for SDR SW20 - Camcorder - 680 KP





















































































































Search results

Summary of Contents for SDR SW20 - Camcorder - 680 KP

Reviews:

Related manuals for SDR SW20 - Camcorder - 680 KP

Brands by name

Popular brands

Panasonic SDR SW20 - Camcorder - 680 KP, Operating Instructions Manual

Search results

Summary of Contents for SDR SW20 - Camcorder - 680 KP

Reviews:

Related manuals for SDR SW20 - Camcorder - 680 KP

Brands by name

Popular brands