Panasonic SDR SW20 - Camcorder - 680 KP Page 62 Operating Instructions Manual Download

Page: 62 / 116

VQT1M21

Connect the unit and AC adaptor (P.22), and set the mode dial to a setting

other than [OFF].

Connect the unit and printer with the USB cable (supplied).

Insert the plugs as far as they will go.

Select [PictBridge].

Select the still pictures to print.

Number of
copies (Max. 9)

Set the number of copies.
• To not print the picture, set “0”.
• Repeat steps

and

to select up to 8 still

pictures for printing.

●

Do not use any other USB connection cables except the supplied one.

(Operation is not guaranteed with any other USB cables.)

●

Connect the unit directly to the printer without going through a USB hub.

●

For paper size and print quality, etc., check printer settings.

●

Avoid the following operations during printing. Otherwise, pictures will not print

correctly:

  • Disconnecting the USB cable
  • Opening the card/battery door
  • Rotating the mode dial
• Shutting off power

With other

products

Printing pictures from
PictBridge printers

Summary of Contents for SDR SW20 - Camcorder - 680 KP





















































































































Search results

Summary of Contents for SDR SW20 - Camcorder - 680 KP

Reviews:

Related manuals for SDR SW20 - Camcorder - 680 KP

Brands by name

Popular brands

Panasonic SDR SW20 - Camcorder - 680 KP, Operating Instructions Manual

Search results

Summary of Contents for SDR SW20 - Camcorder - 680 KP

Reviews:

Related manuals for SDR SW20 - Camcorder - 680 KP

Brands by name

Popular brands