Panasonic SDR SW20 - Camcorder - 680 KP Page 89 Operating Instructions Manual Download

Page: 89 / 116

VQT1M21

This section explains the main messages appearing on the LCD monitor and
how to deal with them.

Message

What to check

PLEASE CONNECT
AC ADAPTOR

You tried connecting the unit to a computer without
connecting the AC adaptor.

ERROR
OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN
ON AGAIN.

The unit detected an error. Eject the SD card and shut
power off and turn back on.

DISCONNECT USB
CABLE.

The unit is not properly connected to a computer or
printer.
Disconnect and reconnect the USB cable.

CANNOT
OPERATE WHILE
CONNECTED TO
COMPUTER.

Power to the unit cannot be shut off while it is
connected to a computer.

CARD ERROR
DETECTED.

The data on the SD card contains errors.
To repair the data, either use a battery of sufficient life
or connect the AC adaptor. Depending on the error, it
may take time to repair the data.

NOW REPAIRING
DATA.

The data has been repaired.

●

Depending on the situation, the data may not be

completely repaired.

●

If power is shut off without repairing data, data can

be repaired the next time that power is turned on.

●

If repairing fails, the data cannot be played back.

Format the SD card with this unit.

●

Do not repair SD cards recorded on other devices

on this unit.

DISC IS UNUSABLE.
CHECK DISC.

The disc cannot be used or cannot be written on. Use
a new disc.

CANNOT CHECK
CONNECTED
DEVICE.
DISCONNECT THE
USB CABLE FROM
THIS UNIT.

A device that cannot be used with this unit is
connected to the unit.

Summary of Contents for SDR SW20 - Camcorder - 680 KP





















































































































Search results

Summary of Contents for SDR SW20 - Camcorder - 680 KP

Reviews:

Related manuals for SDR SW20 - Camcorder - 680 KP

Brands by name

Popular brands

Panasonic SDR SW20 - Camcorder - 680 KP, Operating Instructions Manual

Search results

Summary of Contents for SDR SW20 - Camcorder - 680 KP

Reviews:

Related manuals for SDR SW20 - Camcorder - 680 KP

Brands by name

Popular brands