Reference
47
VQT2W23
[BTT755[for[Australia[and[New[Zealand]
No power.
≥
Ensure the AC mains lead of the wireless system is
connected properly.
The wireless link indicator (e.g., “
[W]
”) is flashing.
≥
There is no link between the main unit and the wireless
system. Turn the wireless system off and then back on.
Alternatively, turn the wireless system off, disconnect the AC
mains lead and then reconnect it.
The wireless link indicator (e.g., “
[W]
”) does not light.
≥
Check that the main unit is turned on, and the wireless
system is turned on.
≥
Ensure that the digital transmitter is fully inserted into the slot
of the main unit. (
>
18)
The wireless link indicator keeps flashing between red and
green.
≥
There is a power supply problem. Consult the dealer.
I can’t connect to the network.
≥
Confirm the network connection and settings. (
>
19, 42)
≥
Check the operating instructions for each device and
connect accordingly.
When using Wireless LAN connection, video or audio from the
DLNA Certified media server is played back intermittently, not
played back or video frames are dropped during playback.
≥
Higher transfer rate router such as 802.11n (2.4 GHz or 5 GHz)
Wireless router (Access Point) may solve the problem. If you use
802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point), it is
necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless telephone etc. at
2.4 GHz may result in connection interruptions or other problems.
≥
On the “Access Point Connection Setting” screen (
>
42), the
continuous lighting of at least 4 “Reception” indicators is the
target for a stable connection. If 3 or fewer indicators are lit or
the connection is being interrupted, change the position or angle
of your Wireless router (Access point) and see if the connection
state improves. If there is no improvement, connect to a wired
network and perform the “Network Easy Setting” (
>
22) again.
The contents of the USB device cannot be read.
≥
USB devices connected using USB extension cable other
than the supplied with the Wireless LAN Adaptor DY-WL10
(optional) or a USB hub may not be recognised by this unit.
BD-Video or DVD-Video is not played.
≥
Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (
>
11)
≥
You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (
>
39)
≥
Some BD-Video can only be output with HDMI.
I can’t play back BD-Live.
≥
The SD card is write-protected. (
>
11)
≥
Confirm that this unit is connected to the broadband Internet. (
>
19)
≥
Confirm the “BD-Live Internet Access” settings. (
>
40)
≥
Confirm an SD Card is inserted into the SD Card slot. (
>
24)
Alternative soundtrack and subtitles cannot be selected.
≥
The languages are not recorded on the disc.
≥
You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (
>
27)
Angle cannot be changed.
≥
Angles can only be changed during scenes where different
angles are recorded.
Wireless system (SH-FX71)
Network
Other difficulties with playback
SCBTT755_350EBGN_VQT2W23.book 47 ページ ２０１０年６月１８日 金曜日 午後４時５８分
