12
VQT2W23
STEP 1: Preparing the speakers
[BTT755]
Caution
≥
Do not stand on the base. Be cautious when children are
near.
≥
When carrying speakers, hold the stand and base parts.
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥
For wall mount, refer to page 44.
≥
Keep the screws out of reach of children to prevent
swallowing.
Caution
≥
The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥
Do not attempt to attach these speakers to walls using methods other than those described in this manual.
≥
Do not touch the front netted area of the speakers. Hold by the sides.
Assembling the speakers
2 Front speakers
2 Surround speakers
4 Stands (with cables)
4 Bases
8 Screws A
4 Screws B
A
B
1
2
2
1
Back of the base
Tighten
securely.
Insert the wire fully.
r
: White
s
: Blue line
Push!
Leave about 80 mm
Tighten securely.
Screw A
Screw B
Press into the groove.
Pull the cable
straight along the
line and slide into
the groove.
SCBTT755_350EBGN_VQT2W23.book 12 ページ ２０１０年６月１８日 金曜日 午後４時５８分
