8
R
Q
T
X
1234
Use this connection when you want to output the original
surround audio from your STB, etc. to this unit.
Connect the optical digital audio cable (not supplied)
from the DIGITAL AUDIO IN OPTICAL terminal on this
unit to the OPTICAL OUT terminal on your STB.
≥
If the DIGITAL AUDIO IN OPTICAL terminal is already
in use for the TV audio, reconnect the TV audio to the
AUX terminal using an audio cable.
If you have various sound sources (such as Blu-ray Disc player, DVD
recorder, VCR, etc.), connect them to the available inputs on the TV
and the TV output should then be connected to the SCART (AV), AUX,
HDMI AV OUT
§
1
or DIGITAL AUDIO IN OPTICAL terminal of this unit.
Conserving power
This unit consumes a small amount of power, even when
it is in standby mode (approx. 0.8 W). To save power
when the unit is not to be used for a long time, unplug it
from the household mains socket.
You will need to reset some memory items when plugging
back this unit.
The supplied AC mains lead is for use with this unit only.
Do not use it with other equipment. Also, do not use cords for
other equipment with this unit.
Do not:
≥
mix old and new batteries.
≥
use different types of batteries at the same time.
≥
take apart or short circuit.
≥
attempt to recharge alkaline or manganese batteries.
≥
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going to
be used for a long period of time. Store in a cool, dark
place.
Aim at the remote control signal sensor (
B
4), avoiding
obstacles.
Distance: Within approx. 7 m
Angle: Within approx. 20° up and down, approx. 30° to
the left and right
The Easy setup screen assists you in making
necessary settings.
Set Top Box (cable/satellite/Blu-ray Disc player,
etc) connection
step 3
AC mains lead connection
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
step 4
Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instructions.
AC IN
This unit
(rear)
AC mains lead
(supplied)
To household mains socket
R6/LR6, AA
Press in and lift up.
Replace the cover.
Insert so the poles (
r
and
j
) match those in the
remote control.
≥
Use alkaline or manganese batteries.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of time with
doors and windows closed.
Use
step 5
Easy setup
Preparation
Turn on your TV and select the appropriate video input
mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the
connection to this unit.
≥
To change your TV’s video input mode, refer to its
operating instructions.
≥
This remote control can perform some basic TV
operations (
B
4).
1
Press [
Í
]
1
to turn on the unit.
≥
The Easy setup screen appears automatically.
2
Press [
3
,
4
]
8
to select “Yes” and press [OK]
8
.
3
Follow the messages and make the settings with
[
3
,
4
,
2
,
1
]
8
and [OK]
8
.
≥
Language
Select the language used on menu screen.
≥
TV aspect
Select the aspect to suit your TV.
≥
Speaker layout
Select “Surround layout (Recommended)” mode or
“Front layout (Alternative)” mode according to your
speaker layout (
B
6, Installation).
≥
Speaker check
Listen to speaker output to confirm speaker connections.
≥
Speaker output
Make surround sound setting for speaker output.
≥
TV audio
Select the audio input connection from your TV.
For AUX connection (
B
7): Select “AUX”.
For HDMI connection (
B
7): Select “ARC”.
For DIGITAL AUDIO IN OPTICAL connection (
B
7):
Select “DIGITAL IN”.
For SCART (AV) connection (
B
7): Select “AV”.
This will be the TV audio setting for VIERA Link
“HDAVI Control”. (
B
15)
SC-XH150 EB_eng.book Page 8 Monday, January 10, 2011 6:57 PM
