22
R
Q
T
X
1234
G
e
tti
n
g
S
tar
ted
P
layi
n
g
Di
scs
Ot
h
e
r Op
e
ra
ti
o
ns
Refer
e
n
c
e
You can attach all of the speakers (except subwoofer) to
a wall.
≥
The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 k
g
per
screw. Consult a qualified building contractor when
attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the
hole(s).
∫
Tips
Use the measurements indicated below to identify the
screwing positions on the wall.
≥
Leave at least 20 mm of space above the speaker and
10 mm on each side to allow enough space for fitting
the speaker.
∫
To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
Before requesting service, make the following checks. If
you are in doubt about some of the check points, or if the
solutions indicated in the following guide do not solve the
problem, consult your dealer for instructions.
No power.
Insert the AC mains lead securely. (
B
8)
The unit is automatically switched to standby mode.
≥
The Sleep timer was working and had reached the set
time limit. (
B
4)
≥
This unit will automatically switch to standby mode after
30 minutes of inactivity. (
B
4)
This unit is turned off when the input for the TV is
changed.
This is normal when using VIERA Link “HDAVI Control 4
or later”. For details please read the operating
instructions for the TV.
The display is dark.
Select “Bright” in “FL Dimmer” in the Others menu.
(
B
19)
“NO PLAY”
≥
You inserted a disc the unit cannot play; insert one it
can. (
B
20)
≥
You inserted a blank disc.
≥
You inserted a disc that has not been finalised.
“NO DISC”
≥
You have not inserted a disc; insert one.
≥
You have not inserted the disc correctly; insert it
correctly. (
B
12)
“
OVER CURRENT ERROR”
The USB device is drawing too much power. Switch to
“DVD/CD” mode, remove the USB and turn the unit off.
“F61”
Check and correct the speaker cable connections. If this
does not fix the problem, consult the dealer. (
B
6)
“F76”
There is a power supply problem. Consult the dealer.
Speaker installation option
Attaching to a wall
e.g., Front speaker
DO NOT
DO
≥
In this position, the
speaker will likely fall if
moved to the left or right.
≥
Move the speaker so
that the screw is in this
position.
At least 30 mm
‰
7.0 mm to
‰
9.4 mm
Wall or pillar
3 mm to 5 mm
‰
4.0 mm
Front/Surround speaker
Center speaker
A
17.6 mm
B
98.7 mm
C
40 mm
D
40 mm
E
16.7 mm
F
63.7 mm
G
23 mm
H
96 mm
I
26 mm
Troubleshooting guide
Power
Unit displays
Wall
Screw eye
(not supplied)
String (not supplied)
Less than
10 cm
SC-XH150 EB_eng.book Page 22 Monday, January 10, 2011 6:57 PM
