9
RQ
T
X
12
65
ENGLISH
Opening/Closing the
sliding door
Preparation
Press [
Í
] to turn the unit on.
For disc operations:
A
While the sliding door is closed, press [CD
<
]
to open the sliding door.
For iPod/iPhone operations:
B
While the sliding door is closed, press [iPod
<
]
to open the sliding door.
∫
Closing the sliding door
Press [CD
<
] or [iPod
<
] again.
≥
Keep fingers away from the sliding door when it is closing to avoid possible
minor injuries.
≥
Damage may occur if the sliding door is forced closed.
≥
Be careful of CD hitting the sliding door while being removed.
≥
The sliding door will not close if the docking switch lever is not returned to the
original position.
With this function the sliding door can be opened without
pressing a button. The sliding door will open or close by moving
the palm of your hand over the sensors on the top of the unit.
For disc operations:
Place the palm of your hand over sensor
B
and
then move it over sensor
A
.
≥
To close the sliding door, place the palm of your hand over
sensor
A
and then move it over sensor
B
.
For iPod/iPhone operations:
Place the palm of your hand over sensor
A
and
then move it over sensor
B
.
≥
To close the sliding door, place the palm of your hand over
sensor
B
and then move it over sensor
A
.
∫
To change the setting of the open/close sensor
The sensitivity of the sensor can be changed to increase or
decrease the activating area of the open/close sensor.
Press [OPEN/CLOSE SENSOR] repeatedly to
select “MODE 1”, “MODE 2”, “MODE 3” or
“OFF SENSOR”.
Select the mode that allows correct operation.
≥
Factory preset: “MODE 2”
≥
To turn the open/close sensor off, select “OFF SENSOR”.
∫
To change the sound effect settings of the
open/close sensor
1
Press [SOUND] repeatedly to select “BUZZER”.
2
Press [
2
] or [
1
] to select the following setting.
≥
A red light is lit from the position of the sensor. This is normal.
≥
The open/close sensor might be unintentionally activated if an object, hand,
part of your arm, pets or children move over the top of the unit.
≥
If the open/close sensor does not react, move the palm of your hand closer to
the top of the unit and change the speed that you move your hand.
≥
If the open/close sensor does not work, try changing the sensor’s setting. If it
still does not work, open/close the sliding door using the buttons on the unit or
the remote control.
≥
When the sensor setting is changed to “MODE 1”, move your hand closer
(approx. 3 cm) over the unit.
≥
The disc operation side of the sliding door will not open during CD playback
or pause.
Disc operations
1
Press [
Í
] to turn the unit on.
2
Open the sliding door. (
>
left)
3
With the label of the disc facing
towards you, tilt the disc into the
disc tray under the sliding door.
4
Place the disc onto the spindle in
the centre and then push the disc
down until it clicks into place.
≥
Make sure that the unit does not fall when
inserting the disc.
5
Close the sliding door. (
>
left)
∫
Removing a disc
1
Open the sliding door.
2
Hold the centre and the top right of the disc and pull the top
right of the disc to unlock it from the spindle.
3
Tilt the disc so as not to touch the sliding door or the lens and
remove the disc.
Opening the sliding door
[HC55]
Open/Close sensor
A
B
ンモュリヰ
ヷヰロヶヮユ
ヷヰロヶヮユ
LOW:
Set the sound effect level to low.
MID:
Set the sound effect level to medium.
HIGH:
Set the sound effect level to high.
OFF:
Turn the sound effect off.
Inserting a disc
SC-HC55_35-RQTX1265.book 9 ページ ２０１１年３月２７日 日曜日 午後７時３２分
