18
RQ
T
X
12
65
The name of the connected device is shown as “
¢
”.
≥
Character that cannot be displayed will be replaced by “
¢
”.
≥
An unknown device name is detected and displayed as
“
¢¢¢¢¢
”.
Noise is heard or broken sound.
≥
The Bluetooth
®
communication distance has exceeded 10 m.
Bring the device closer to the unit.
≥
There are obstructions between the device and the unit.
Remove or avoid the obstacles.
≥
Select “MODE 1” to improve connection quality (
>
15).
≥
Interference from mobile phones.
No response when [
1
/
;
] is pressed.
≥
Disconnect the USB device and then reconnect it.
Alternatively, turn the unit off and on again.
The USB drive or its contents cannot be read.
≥
The USB drive format or its contents is/are not compatible with
the unit (
>
16).
≥
The USB host function of this product may not work with some
USB devices.
≥
USB devices with storage capacity of more than 8 GB may not
work in some instances.
Slow operation of the USB flash drive.
≥
Large file size or high memory USB flash drive takes longer
time to read.
The elapsed time displayed is different from the actual play
time.
≥
Copy the data to another USB device or backup the data and
reformat the USB device.
The following messages or service numbers appear on the
unit’s display when something unusual is detected during
startup and use.
“--:--”
≥
You plugged the AC mains lead in for the first time or there was
a power failure recently. Set the time (
>
12).
“ADJUST CLOCK”
≥
Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
≥
Play timer is not set. Adjust the play timer accordingly.
“PGM FULL”
≥
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
“NO PLAY”
≥
A CD-ROM disc that is not in CD-DA or MP3 format is inserted.
It cannot be played.
≥
Check the content. Only MP3 format files can be played.
≥
If there are more than 255 albums or folders (audio and
non-audio), some of the MP3 files in these albums may not be
read and played. Transfer these music albums to another
USB. Alternatively, reformat the USB device and save these
music albums prior to saving the other non-audio folders.
“ERROR”
≥
Incorrect operation is performed. Read the instructions and try
again.
“F61” or “F76”
≥
There is a power supply problem. Consult the dealer.
≥
Disconnect the USB device. Turn the unit off and on again.
“AUTO OFF”
≥
The unit has been left unused for about 30 minutes and will
shut down in a minute. Press any button to cancel it.
“ILLEGAL OPEN”
≥
Sliding door is not in correct position. Turn the unit off and on
again.
“NODEVICE”
≥
The iPod/iPhone device is not inserted correctly. Read the
instructions and try again (
>
12).
≥
The USB device is not inserted. Check the connection.
“REMOTE 1”
≥
The main unit is in “REMOTE 1” mode. Switch the remote
control to “REMOTE 1” mode (
>
16).
“REMOTE 2”
≥
The main unit is in “REMOTE 2” mode. Switch the remote
control to “REMOTE 2” mode (
>
16).
[HC55]
“F70”
≥
There is a Bluetooth
®
module problem. Disconnect the AC
mains lead and consult your dealer.
“NO DISC”
≥
Insert the disc to be played (
>
9).
“NOT SUPPORTED”
≥
You have inserted an iPod/iPhone that cannot be played
(
>
12).
[HC55]
“START ERROR”
≥
Check the iPhone/iPod touch.
Visit the below website for more information:
http://radio.vtuner.com/panasonic/en/
“UNLOCKED”
≥
The iPod/iPhone docking switch lever is not locked in position.
Make sure that the iPod/iPhone docking switch lever is
properly pushed back into place (
>
12).
[HC55]
“CANNOT SET”
≥
Select an audio source other than “BLUETOOTH” or
“INTERNET RADIO”.
[HC55]
Bluetooth
®
operations
USB operations
Displayed messages
SC-HC55_35-RQTX1265.book 18 ページ ２０１１年３月２７日 日曜日 午後７時３２分
