24
VQT2Q55
Enjoying sound effects
from all speakers
1
Press [SURROUND] several times to select
the effect.
≥
The selected effect will only be displayed on the main
unit.
2
While “MANUAL” is displayed, press
[
2
,
1
] and select the desired effect.
∫
Adjusting speaker level during play
1
Press and hold [
j
CH SELECT] to activate the speaker
setting mode.
2
Press [
j
CH SELECT] several times to select the speaker.
Each time you press the button:
L R
—)
C
_)
RS
_)
RB
*
_)
LB
*
_)
LS
_)
SW
^"""""""""""""""""""""""""""""b
* When the optional surround back speakers are connected.
3
Press [
3
] (increase) or [
4
] (decrease) to adjust the
speaker level for each speaker.
s
6 dB to
r
6 dB
∫
Changing the sound modes
1
Press [SOUND] several times to select the mode.
≥
The selected mode will only be displayed on the main
unit.
2
While the selected mode is displayed
Press [
2
,
1
] and select the desired setting.
≥
The sound effects/modes may not be available or have no effect with some
sources.
≥
You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
Enjoying surround sound
effects
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CH
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
MANUAL
DOLBY PL II MOVIE (Dolby Pro Logic II Movie)
Suitable for movie software, or the one recorded in
Dolby Surround.
(except DivX)
DOLBY PL II MUSIC (Dolby Pro Logic II Music)
Adds 5.1-channel effects to stereo sources.
(except DivX)
7.1CH VS (7.1CH Virtual Surround)
You can enjoy 6.1/7.1-channel surround-like effect
using 5.1-channel speakers.
S.SURROUND (Super Surround)
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be
output to the front speakers and the subwoofer only.
L R: Front speaker (left and right:only the balance
is adjustable.)
≥
Press [
2
,
1
] to adjust the balance of the front
speakers.
C:
Centre speaker
RS: Surround speaker (right)
RB
*
: Surround back speaker (right)
LB
*
: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥
The channels not included in the playing audio will not be
displayed (subwoofer is displayed even if it is not
included).
EQ: (Equalizer)
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUB W: (Subwoofer level)
You can adjust the amount of base.
1
(Weakest effect) to
4
(Strongest effect)
≥
The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics
of your room are not optimal.
≥
The setting you make is retained, and recalled every
time you play from the same type of source.
C.FOCUS: (Centre focus)
(Effective when playing audio containing centre
channel sound.)
You can make the sound of the centre speaker seem
like it is coming from within the TV.
W.SRND: (Whisper-mode Surround)
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
SCBT737_337_230GN_VQT2Q55.book 24 ページ ２０１０年２月２３日 火曜日 午後５時２２分
