Panasonic SC-BT222, Operating Instructions Manual

Page: 35 / 48

Advanced operations
Optional speaker
settings
35
VQT2S28
Speaker installation option
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k g per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
≥ Do not attempt to attach these speakers to walls using methods other than those described in this manual.
Preaparation
Remove the speaker bases.
1
Remove the screw from the speaker.
2
Remove the speaker base.
1
Drive a screw (not included) into the wall.
A
At least 30 mm
B
‰ 4.0 mm
C
‰
7.0 mm to
‰
9.4 mm
D
Wall or pillar
E
5.5 mm to 7.5 mm
2
Fit the speaker securely onto the screw(s)
with the hole(s).
Front speaker
A
48.5 mm
B
In this position, the speaker will likely fall if moved to the
left or right.
C
Move the speaker so that the screw is in this position.
∫ To avoid speaker dropping
Front speaker
≥ Consult a qualified building contractor to avoid damage to
the wall or speakers.
≥
Use a string of less than
‰
2.0 mm, which is capable of
supporting over 10 k g .
≥
Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that
may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
≥
Use a string of less than
‰
2.0 mm, which is capable of supporting over 10 k g .
Front speaker A
String (not included)
Thread from the wall to the speaker and tie tightly.
B
Rear of the speaker
C
Screw eye (not included)
D
Wall
E
Approx.150 mm
Attaching to a wall










DO NOT
DO




A
String (not included)
B
Screw eye (not included)
C
Less than 10 cm
D
Rear of the speaker
Preventing the speakers from falling





SCBT222EBEG_VQT2S28-B.book 35 ページ ２０１０年２月１２日 金曜日 午後１時４分