Panasonic SC-BT222, Operating Instructions Manual

Page: 32 / 48

32
VQT2S28
Still Mode
Select the type of picture shown when you pause playback.
Seamless Play
The chapters segment in playlists are played seamlessly.
≥
Select “On” when the picture freezes for a moment at the
chapters segment in playlists.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
Dynamic Range Compression
You can listen at low volumes but still hear dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥
“Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings.
Digital Audio Input
Select whether to receive the digital sound as PCM or the
original sound format.
Select “On” if the sound is cut off intermittently.
Downmix
Select "Surround encoded" when connected to equipment that
supports the conversion from 2 channels to multi channel
surround.
≥
There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases.
– AVCHD playback
j
Playback of secondary audio (including the button click
sound).
High Clarity Sound
When connected to TV via HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥
Set to “Enable” and then set “High Clarity Sound” on the
playback menu to “On”. (
>
30)
Audio Delay
Mis-sync between the video and audio is corrected by delaying
the audio output.
Speaker
Refer to page 34
Picture
Automatic Automatically selects the type of picture shown.
Field
Select if jittering occurs when “Automatic” is
selected.
Frame
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
Sound
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
MPEG Audio
Select the audio signal to output.
≥
Select “
PCM
” when the connected equipment cannot
decode the respective audio format.
≥
Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound).
( > 21)
≥ If “Off” is selected, the unit outputs the primary audio only.
SCBT222EBEG_VQT2S28-B.book 32 ページ ２０１０年２月１２日 金曜日 午後１時４分