8
RQT9655
≥
The below settings are the alternative or
additional settings for “Method 2”. (
>
7)
≥
Enable Java and Cookies in your browser settings.
≥
This unit can also be set using the WPS PIN code.
Replace step 2 of “Method 1” with the following steps.
(Before starting, refer to the wireless network router’s
operating instructions for details on how to enter the PIN
code.)
1
While the Wi-Fi
®
status indicator blinks blue, press
and hold [– WPS] again.
{.
The Wi-Fi
®
status indicator blinks purple.
Continue to the next step.
2
Enter the PIN code “64428147” into the wireless
router.
Advanced network settings
Alternative settings
Instead of steps 4 and 5:
Select “Manual settings”.
1
Type your
home wireless network name
into the “Network name (SSID)” field.
2
Select the
encryption method
from the
“Security system” drop down list.
3
Type the
password
into the “Password” field
and then select “NEXT”.
Additional settings
After step 5 and before step 6:
If your home wireless network has been setup
to use specific IP Addresses, Subnet Mask,
Default Gateway, Primary DNS, etc.
Select “Advanced network settings”.
{.
Input the required addresses into each field and
select “OK”.
≥
To change the settings back to DHCP, select “ON”
from the “DHCP” drop down list.
If you want to change the name of this unit.
Select “Edit STEREO SYSTEM name”.
{.
Only ASCII characters can be used.
{.
Type a new name into the “STEREO SYSTEM
name” field and select “OK”.
SC-AP01PPC~RQT9655.book 8 ページ ２０１２年３月２日 金曜日 午後７時５７分
