Operations
11
RQT9655
The following operations can be performed from
the “Sound” screen.
∫
The preset equalizer
“HEAVY” (heavy), “SOFT” (soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT” (flat/off).
≥
The factory preset is “HEAVY”.
∫
Bass and Treble (BASS, TREBLE)
Adjust the level (
j
4 to
i
4).
∫
Dynamic Bass (D.BASS)
“ON” or “OFF”.
≥
The factory preset is “ON”.
∫
Direct-vocal surround (D.SURROUND)
“LEVEL 1”, “LEVEL 2” or “OFF”.
≥
The factory preset is “OFF”.
∫
Muting the sound (MUTE)
The sound is temporarily muted.
∫
Adjusting the volume (VOL)
Move the volume bar to adjust the volume of this
unit.
≥
You may experience a reduction in sound quality when
these effects are used with some sources. If this occurs,
turn the sound effects off.
The following operations can be performed from
the “Controller” screen.
∫
Turn this unit on or off (
Í
)
≥
To turn this unit on, “NET STANDBY” must be set to
“ON”. (
>
below)
∫
Automatic standby (AUTO OFF)
This unit can be set to turn off automatically if there
is no sound output and no operation for 30 minutes.
≥
As a factory preset, this function is turned on. To
deactivate this function, select “OFF”.
≥
Unless automatic standby is deactivated, this function
will work every time this unit is turned on.
≥
This setting can only be performed from the remote
control app.
∫
Network standby (NET STANDBY)
This unit can turn on automatically from standby
mode when this unit is selected as the AirPlay
speakers.
≥
As a factory preset, this function is turned off. To activate
this function, select “ON”.
≥
The factory preset is “OFF”. If this function is set to “ON”
the standby power consumption will increase.
≥
This setting can only be performed from the remote
control app.
Sound adjustment
Other adjustment
SC-AP01PPC~RQT9655.book 11 ページ 2012年3月2日 金曜日 午後7時57分