12
RQT9655
Others
To check the Wi-Fi
®
signal strength where the unit
is located.
Preparation
≥
Turn the unit on.
≥
Connect this unit to the wireless network. (
>
6)
1
If this unit is in use, stop the AirPlay
playback to this unit.
≥
Wait for at least 15 seconds before
proceeding to step 2.
2
Press and hold both
[– VOLUME]
and
[VOLUME
i
]
on this unit for more than 2
seconds.
3
The operation indicator
lights
and
then
blinks
a set number of times.
Count the number of times the indicator
blinks.
≥
A stable connection is available when the
operation indicator blinks 3 times.
≥
Change the position or angle of your wireless network
router or the unit in the following cases:
– The operation indicator only blinks 2 times or 1 time.
– The sound is interrupted.
Occasionally, Panasonic may release updated
software for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
Preparation
≥
Turn the unit on.
≥
Connect this unit to the wireless network. (
>
6)
j
Make sure that the wireless network is
connected to the Internet.
1
Press and hold both
[– VOLUME]
and
[– WPS]
on this unit for more than 2
seconds.
{.
The operation indicator (
>
4) blinks.
{.
After the update has finished, the operation
indicator (
>
4) lights.
2
Disconnect the AC adaptor and reconnect
it after 3 minutes.
≥
Downloading will require several minutes. It may
take longer or may not work properly depending on
the connection environment.
≥
If the update is unsuccessful, the operation indicator will
blink in a specific sequence.
Wi-Fi
®
signal strength
Software update
DO NOT DISCONNECT the AC adaptor while
this unit is updating.
≥
During the update process, no other operations can be
performed.
≥
If the update is unsuccessful, the operation indicator
will blink in a specific sequence. (
>
below)
No. of blinks
Problems and solutions
3
The software download has failed.
Please try again later.
The server cannot be found. Make
sure that the wireless network is
connected to the Internet.
2
This unit cannot connect to the
network. Check the network
connection.
1
The update has failed. Turn this unit
off and remove the AC adaptor.
Reconnect the AC adaptor and try
again.
SC-AP01PPC~RQT9655.book 12 ページ ２０１２年３月２日 金曜日 午後７時５７分
