23
Trouble
Check items
Actions
Items inside
the product
are not
cooled at all.
<Check the power supply circuit>
●
Is the socket plugged in?
●
Is the power supply cut off?
●
Is a wiring breaker tripped?
⇒
Plug the socket in securely.
⇒
Check the power supply source.
⇒
Contact the supplier or dealer
where you purchased the
product or a licensed service
provider.
Items inside
the product
are not
cooled well.
●
Is the ambient temperature/
humidity excessively high?
●
Is the door closed?
●
Is the item placed next to the
inner wall (either side)?
●
Is the condenser clogged?
●
Is the product installed without
sufficient gap around?
●
Is the product installed in
direct sunlight, or near an
oven or stove?
●
Is there too many things put in
the product?
⇒
Keep the ambient temperature
and humidity not over 35°C
and 60% respectively.
⇒
Close the door securely.
⇒
Place items away from the
inner wall.
⇒
Refer to “Condenser” (Page 17).
⇒
Refer to “Installation” (Page 9).
⇒
Remove the source of heat.
⇒
Refer to “How to place wine”
(Page 14).
Noise is
heard.
●
Is the product installed on an
unstable floor?
●
Does the product stand
vertically?
●
Is the rear of the product
touching a wall?
⇒
Place the product securely on a
strong and level floor.
⇒
For a while after starting the
product, you may hear some
noise from the compressor.
However, it will cease soon.
Condensation
forms at
the rear and
mirror of the
product.
●
Has the ambient temperature
or humidity been high for
several days?
⇒
If the product is installed in
an environment where the
ambient temperature and
humidity is over 30°C and 60%
respectively, condensation may
form.
Wipe off condensation with a
dry soft cloth.
Troubleshooting
CMT-6-P110-113-00-0.indd 23
CMT-6-P110-113-00-0.indd 23
05/15/12 8:09 AM
05/15/12 8:09 AM
