12
Operation
Re-start
■
Leave the product for at least 5 minutes before re-starting.
■
If the product is re-started immediately after switching off, the overload
protection unit or a wiring breaker may trip, or an excessive load may be
applied to the compressor, which will result in failure.
Temperature adjustment of wine
cooler
Lamp power on/off button
Temperature
Temp. Control
Lamp
Red Wine
White Wine
C
12
14
16
6
8
10
Indicator lamp indicates
temperature setting (Celcius)
Temperature up button
Temperature down button
Plug the power cord. One indicator lamp indicates temperature setting will
be typically shown at 16°C first. Then after 3 minutes, compressor begins
to operate. The product starts cooling until 12°C is reached, which is the
default setting.
Temperature setting
Temperature range is 5 to 16°C which is suitable for each of wine type. The
desired temperature can be set by pressing arrow button or . Indicator
lamps will be on according to the desired temperature setting. During
adjusting the setting, the following 2 lamps will be on :
Lamp 1 : Current temperature of wine cooler (same as thermometer)
Lamp 2 : Desired temperature. It can be set by pressing arrow button
up/down
After 5 seconds, the indicator lamp showing new temperature will be off.
It indicates that the new temperature setting is completed. Then the product
will operate until it reaches the new temperature setting and the temperature
will be controlled accordingly.
How to turn the inner lamp on/off
Normally the inner lamp is turned off to avoid UV effect on wine quality.
However, if you want to turn the lamp on to choose the wine inside, press
(Lamp) button at the controller display. The inner lamp will be on. And
if you want to turn it off, just press it again. The lamp indicator will be off.
Unless the lamp is swiched off, the lamp will be turned off automatically
within 5 minute by default.
CMT-6-P110-113-00-0.indd 12
CMT-6-P110-113-00-0.indd 12
05/15/12 8:09 AM
05/15/12 8:09 AM
