12
R
Q
T
7994
Conne
ct
ions
Se
tti
ngs
Bas
ic O
p
er
at
io
n
s
O
p
er
at
io
n
s
Bef
o
re
use
Ref
er
ence
Receiver settings -
Basic
Change the settings to tailor your equipment to
the environment in which you are using it.
• Before making any changes, read the following descriptions of the
settings and refer to the instructions for the speakers and equipment.
• Any changes to settings remain as set even if the power is turned off.
á
For more detailed information on settings refer to “Receiver settings -
Advanced” on page 21.
á
Page 24 “Multi control menus and factory settings”.
Use the MULTI CONTROL menus to change the settings.
(
á
left “Basic operations with the MULTI CONTROL”)
Set the speaker combination connected to this unit.
The speaker combination has to be set in order for the sound to be output
properly.
Select this when you connect bi-wire compatible front speakers. (
á
page 8)
This is displayed when you connected surround back speakers in
“Speakers combination settings”
(
á
above).
Select this to set the number of surround back speakers.
Basic operations with the MULTI CONTROL
Turn to change.
Press to enter.
n
To return to the previous setting/To cancel
Press.
INPUT SELECTOR
ENTER
CANCEL
MULTI
CONTROL
Turn on.
1
Enter the MULTI CONTROL.
Select “
SETUP 1
”
(“
BASIC SETUP
” scrolls once)
and press [ENTER].
Select the settings to change.
(
á
below, page 13)
Speakers combination settings
2
Select “
SPKR SET
” (SPEAKER SET) and press
[ENTER].
3
Select if you have connected a subwoofer or not
and press [ENTER].
SUBW NO: You have not connected one.
SUBW YES: You have connected one.
4
Select the speaker combination connected to
this unit and press [ENTER].
L C R S SB: All speakers connected
L _ R S SB: No center speaker
L C R S _ _: No surround back speakers
L _ R S _ _: No center and surround back speakers
L C R _ _ _: No surround and surround back speakers
L _ R _ _ _: Only front speakers
5
Select another setting
Finish setting
Press [MULTI CONTROL, CANCEL] 2 times to select “
EXIT
”
and press [ENTER].
Bi-wiring settings
2
Select “
FRNT L/R
” (FRONT L/R) and press
[ENTER].
3
Select “
BI-WIRE
” and press [ENTER].
NORMAL: Normal speakers
BI-WIRE: Bi-wire compatible speakers
4
Select another setting
Finish setting
Press [MULTI CONTROL, CANCEL] 2 times to select “
EXIT
”
and press [ENTER].
Surround back speaker settings
2
Select “
SB SPKR
” (SURROUND BACK SPEAKER)
and press [ENTER].
3
Select the number of speakers and press
[ENTER].
1 SPKR:
If you connect one surround back speaker.
2 SPKRS: If you connect two surround back speakers.
4
Select another setting
Finish setting
Press [MULTI CONTROL, CANCEL] 2 times to select “
EXIT
”
and press [ENTER].
CANCEL
MULTI
CONTROL
INPUT SELECTOR
SETUP 1
