Panasonic SA-PTX7P, Service Manual

Page: 56 / 213

10.2.7. Service Mode Table 7
Timer 1 check
Cancelled automatically
5 seconds later.
DVD laser usage time
(Display 1)
(Display 2)
CD laser
usage time
Cancelled automatically
5 seconds later
Cancelled automatically
5 seconds later.
Cancelled automatically
5 seconds later.
Timer 1 reset
Timer 2 check
Timer 2 reset
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [ ] button on the
remote control unit.
While displaying Timer 1
data, press [STOP] button
on the main unit, and [ ]
button on the remote
control unit.
In STOP (no disc)
mode, press [STOP]
button on the main unit,
and [ ] button on the
remote control unit.
While displaying Timer 2
data, press [STOP] button
on the main unit, and [ ]
button on the remote
control unit.
Timer 1 check
Laser operation timer is measured
separately for DVD laser and CD laser.
FL Display sequence:
Display 1 2.
Press [FL Display] button for
next page of FL Display.
Timer 1 reset
Laser operation timer of both DVD
laser and CD laser is reset all at once.
Timer 2 check
Spindle motor operation timer
Timer 2 reset
Spindle motor operation timer
Time is shown in 4 digits of decimal notation in
a unit of 1 hour.
"0000" will follow "9999".
Shown to the above is DVD laser usage
time, and to the below is CD laser usage
time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999". (DVD laser)
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999". (CD laser)
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
It will clear to "0000" upon reset.
Time is shown in 4 digits of decimal notation in
a unit of 1 hour.
It will be cleared to "0000" upon activating
this.
FL Display
Key Operation
Front Key
Item
Description Mode Name
56
SA-PTX7P