background image

T

Q

BJ09

97

14

Specifications

Power supply

 

AC 220 V to 240 V, 50 Hz

Power consumption

 

44 W

Dimensions

(W x H x D) 211 mm x 114 mm x 267 mm

Mass

Approx. 2.8 k

g

Operating temperature range

 

0 °C to +40 °C

Operating humidity range

35% to 80% RH (no condensation)

RMS output power (both ch driven)

60 W per channel (3

), 1 kHz, 10% THD

Total RMS power (3

)

120 W

35 W per channel (6

), 1 kHz, 10% THD

Total RMS power (6

)

70 W

Speaker load impedance

3

™ 

to 16

Preset memory 

30 stations

Frequency range

87.50 MHz to 108.00 MHz (50 kHz step)

Antenna terminals 

75

 (unbalanced)

DAB memories 

20 channels

Frequency band (wavelength)

Band 

III

5A to 13F

(174.928 MHz to 239.200 MHz)

Sensitivity *BER 4x10

-4

Min requirement 

–98 dBm

DAB external antenna terminal

F-Connector (75

)

Disc played (8 cm or 12 cm)

CD, CD-R/RW (CD-DA, MP3*

3

)

Pick up

Wavelength 

790 nm (CD)

USB Port

Terminal type: USB-A

USB port power

DC OUT 5 V 2.1 A

USB standard 

USB 2.0 High Speed

Media file format support

MP3*

3

 (

¢

.mp3), AIFF (

¢

.aiff), FLAC (

¢

.flac),

WAV (

¢

.wav), AAC (

¢

.m4a), DSD (

¢

.dff/

¢

.dsf)

Audio Support format

MP3*

3

/AAC*

4

Sampling frequency

32/44.1/48 kHz

Audio word size

16 bits

Channel count

2 ch

AIFF/FLAC*

5

/WAV

Sampling frequency

32/44.1/48/88.2/96/176.4/192 kHz

Audio word size

16 bits/24 bits

Channel count

2 ch

DSD

2.8 MHz

USB device file system 

FAT12, FAT16, FAT32

PC IN (EXT-IN)

*

6

Terminal type: USB-B

USB standard

USB 2.0 High Speed

USB Audio Class specification

USB Audio Class 2.0, Asynchronous mode

Audio support format

LPCM

Sampling frequency

32/44.1/48/88.2/96/176.4/192 kHz

Audio word size

16 bits/24 bits

Channel count

2 ch

DSD

2.8 MHz

Headphones

Stereo, 3.5 mm jack

AUX IN (EXT-IN)

Pin jack

Version 

Bluetooth

®

 Ver.2.1+EDR

Class

 

Class 2

Supported Profiles

A2DP, AVRCP

Frequency band

2.4 GHz band FH-SS

Operation Distance 

10 m Line of sight

Supported Codec

 

AAC, SBC

Note:

• Specifications are subject to change without notice. Mass 

and dimensions are approximate.

• Total harmonic distortion is measured by the digital 

spectrum analyzer.

*1: “BLUETOOTH STANDBY” is “OFF”.
*2: No device is connected to the USB port before turning to 

standby mode.

*3: MPEG-1 Layer 3, MPEG-2 Layer 3
*4: Support profile AAC-LC only.
*5: Uncompressed FLAC files may not operate correctly.

Support block size from 1152 to 4096.

*6: USB-DAC port

FLAC Decoder 

Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,

2008,2009 Josh Coalson

Redistribution and use in source and binary forms, with or 

without modification, are permitted provided that the following 

conditions are met:

- Redistributions of source code must retain the above copyright 

notice, this list of conditions and the following disclaimer.

- Redistributions in binary form must reproduce the above copyright 

notice, this list of conditions and the following disclaimer in the 

documentation and/or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its 

contributors may be used to endorse or promote products derived 

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS 

AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED 

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL 

THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY 

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 

OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGE.

General

Power consumption in standby mode*

1, 2

0.35 W (approx.)

(When “BLUETOOTH STANDBY” is “ON”)*

2

0.45 W (approx.)

Amplifier section

FM section

DAB section

 

Disc section

Terminals section

Bluetooth

®

 section

SA-PMX82-M~TQBJ0997.book  14 ページ  2017年4月14日 金曜日 午前9時58分

Summary of Contents for SA-PMX82M

















Reviews: