12.4. Checking and Repairing of CD Servo P.C.B. (Side A)
Step 1
Remove Top Cabinet.
Step 2
Remove Front Panel Unit.
Step 3
Remove SMPS Inner Chassis Unit.
Step 4
Remove CD Mechanism Unit (BRS11C).
Step 5
Remove Main P.C.B..
Step 6
Remove Rear Panel.
Step 7
Place the Front Panel Unit, SMPS Inner Chassis Unit, CD Mechanism Unit (BRS11C), Main P.C.B as diagram shown.
Step 8
Attach 27P FFC to the connector (CN2003) on Main P.C.B..
Step 9
Attach 5P FFC to the connector (CN2700) on Main P.C.B..
Step 10
Extend the Cable Wire with extension Cable Wire (REX1527 15P Cable Wire) from CN2007 on Main P.C.B. to CN5802 on
SMPS P.C.B..
Step 11
CD Servo P.C.B. Side A can be checked and repaired as diagram shown.
60
Summary of Contents for SA-AKX34LM-K
