11.17. Replacement of Rectifier Diode
(D5702)
•
Refer to “Disassembly of SMPS P.C.B.”.
11.17.1. Disassembly of Rectifier Diode
(D5702)
Step 1
Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of the SMPS P.C.B.
Step 2
Desolder pins of the Heatsink A.
Step 3
Remove 1 screw at Switching Regulator IC (IC5701).
Step 4
Remove the Heatsink A with Rectifier Diode (D5702).
Step 5
Remove 1 screw.
Step 6
Remove the Rectifier Diode (D5702) from the Heatsink
A.
Caution: Avoid touching the Heatsink A due to its high
temperature after prolong use. Touching it may lead to
injuries.
11.17.2. Assembly of Rectifier Diode
(D5702)
Step 1
Apply grease to the Heatsink A.
Step 2
Screw the Rectifier Diode (D5702) to the Heatsink A.
Caution: Ensure the Rectifier Diode (D5702) is tightly
screwed to the Heatsink A.
Step 3
Fix the Heatsink A with Rectifier Diode (D5702) on the
SMPS P.C.B. as shown.
Caution: Ensure the Heatsink A with Rectifier Diode
(D5702) are properly seated on the SMPS P.C.B.
Step 4
Screw the Switching Regulator IC (IC5701) to the Heat-
sink A.
Caution: Ensure that the Switching Regulator IC (IC5701) is
tightly screwed to the Heatsink A.
48
Summary of Contents for SA-AKX34LM-K
